Sooty Posted July 18, 2021 Share Posted July 18, 2021 Messing about stripping an old Type2 gearbox ahead of getting Quaife close ratio gear set fitted. Problem is that the gear selector rod is jammed in the gearbox tail. At the moment I've got it standing on the bell housing with the tail end flooded in penetrative fluid but it is not budging. I've tried punching it via the plug cap in the bell housing but it's only moved about 20mm and the plug is against some sort of stop on the casing. I need to get it stripped and the gears etc out ahead of soda blasting prior to it going off to a specialist for rebuild Any hints? Link to comment Share on other sites More sharing options...
Sooty Posted July 18, 2021 Author Share Posted July 18, 2021 Well seized but got it out with more penetrating fluid and a bit of judicious application of hammer and punch through the bellhousing plug Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now