nose cone and bonnet rubbing off paint

[CPGCharlie]

Hi All, 

I have recently had a full respray and almost immediately rubbing between the nose cone and bonnet has removed paint on the corners. 

Are there any good methods to prevent this? There is a good 5 mil play in the nose cone so I guess this will always happen unless the play is reduced. I have looked at shortening bonnet circa 5 mil. paint protection film down the seam between the two moving parts... but i imagine that will eventually wear through. 

Can the clips in the nose cone be upgraded? my 7 is 2005 i'm unsure what they have been replaced with on new 7's?

Any help would be greatly appreciated

Best,

Charlie