rayjackson1950 Posted February 15, 2021 Share Posted February 15, 2021 I have a 1997 Ford 1600 X-flow and now have a heater to install.Could someone tell me what the thread size and type is in the block so that I cn get the correct connectors. All I do know is that the hose is 5/8" ID. Link to comment Share on other sites More sharing options...
rkeywood Posted February 16, 2021 Share Posted February 16, 2021 HiI'm pretty sure the original conn's for the heater hoses are 3/8" NPT (taper). Burton used to do replacements in straight, 90 and 135 deg - the original cast alloy ones are odd angles. I'll check in my box of bits later as I might have spares.Robert Link to comment Share on other sites More sharing options...
rayjackson1950 Posted February 16, 2021 Author Share Posted February 16, 2021 Hi RobertThanks for the info. If you do have these and want to lose them, I would be interested.I have just trawled through Burton web page and cannot find them. I have also looked on Car Builder and they don't have any either.I hope to hear from you later. Link to comment Share on other sites More sharing options...
7 wonders of the world Posted February 16, 2021 Share Posted February 16, 2021 Burton power part numbersFP 477, 478, 479straight, 45 degrees and 90 degreesAll in stockThese fit into the inlet manifold water jacket 9warer outlet) and the water pump (water return) Link to comment Share on other sites More sharing options...
rayjackson1950 Posted February 18, 2021 Author Share Posted February 18, 2021 HiThanks for the info. Now ordered. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now