Original Lotus seven bonnets

[trikefj]

I am having trouble getting a bonnet for an original lotus seven . The guys doing my restoration got one from Arch Motors ( series 2/3 ) and without thinking or measuring up went ahead cutting out inlet, sending to my painter for spraying ,and on return fitting catches and fittings ,only to find when put in place it was about 20 mm short at the scuttle end showing the black rubber rubbing strip. There is no adjustment at the nose cone end.

I have contacted Arch who say they cannot make a one off bonnet, apparently back in the day lotus had several suppliers and it is not a unique problem to find slight differences in measurements , but they very kindly said they are  willing to look at the car and see if they could suggest a solution or supply a different scuttle to solve the problem. However with Covid illnesses and high demand they have not yet been able to collect the car as they are rushed off their feet. 

Can anyone suggest someone / a company who could help in this matter as Arch are very nice people and I feel they they might be regretting having offered their help in the current situation.

The car is in Kent and I'm in Surrey. The car is a bit of a mongrel, it was kit made ,and the paperwork shows the chassis /body as invoiced from Lotus on 26/2/1971 ( £182.45 after discount !!!) however the original bonnet looks to have had a cut out scoop in the top that has been filled in and replaced with a side scoop for the  1500cc Cosworth/Ford that it had when I got it in1975.  Although we have the original bonnet it is in very poor state and not repairable being dented and sheared around the air scoop.

Please any help !!

 

 

 

 

 

 

 

 

 

 

from arch motors ( series 2/3) and assumed it would fit my car without measuring up and therefore went ahead cutting out inlet ,spraying and adding catches etc. Only to find that once fitted it was about 20 mm too short