shn7 Posted October 25, 2020 Share Posted October 25, 2020 Can someone help identify the parts in the photo please. I think they are parts that make two separate head restraints. I want to identify each set and what roll bar/cage they fit. CC's parts store helps identify:3 as 77847S. 2 as 79045S but 1 doesn't match.And is this part of a set too? Link to comment Share on other sites More sharing options...
Wrightpayne Posted October 25, 2020 Share Posted October 25, 2020 1 & 2 fit the later Caged X braced FIA bar, with two ferrule's welded into the X.3-5 fit together and clamp onto the bars of the older FIA bar or cage - there were two types as the tubing between bar and cage was a different diameter. Link to comment Share on other sites More sharing options...
Wrightpayne Posted October 25, 2020 Share Posted October 25, 2020 Never seen 6 before! Link to comment Share on other sites More sharing options...
shn7 Posted October 25, 2020 Author Share Posted October 25, 2020 And now it all makes sense. Thanks, now I can figure out selling them. Link to comment Share on other sites More sharing options...
Wrightpayne Posted October 25, 2020 Share Posted October 25, 2020 4 & 5 slot together and the threaded rod bolts them through the holes in the tubes, which have some adjustment IIRC. The full cage tubes are 32mm so measuring the exhaust clamps may help determine which type it is. Link to comment Share on other sites More sharing options...
John Vine Posted October 26, 2020 Share Posted October 26, 2020 Item 6 looks a bit like an early roller-barrel support strut.JV Link to comment Share on other sites More sharing options...
shn7 Posted October 26, 2020 Author Share Posted October 26, 2020 John, I had thought of inlet support but couldn't find a match on CC's parts pages. Steve Link to comment Share on other sites More sharing options...
orangepeel61 Posted October 26, 2020 Share Posted October 26, 2020 Are items 3-5 handed? Or more to the point, if you had 2 can you mount them for driver and passenger? Link to comment Share on other sites More sharing options...
shn7 Posted October 27, 2020 Author Share Posted October 27, 2020 orangepeel61No. I've just looked and believe it would fit either driver or passenger side on my single diagonal FIA bar with 38mm tubing. Will be listed in Marketplace very shortly. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now