mandalman Posted September 30, 2020 Share Posted September 30, 2020 Can I ask if anyone else has this type of brake light fitted. I am in a quandary as to whether to change it or not. I'm in the process of ordering LED lights from JAL and I'm wondering whether I should keep this or go for one of their smaller 'race' high level brake lights.The reason for considering a change is this unit takes up a lot of real estate on the roll-bar limiting where I can position the Go Pro and it also makes fitting the hood more problematic. I've never driven with the hood on (I'm a relatively new owner) but I would like to get a SBFS half hood and I'm concerned this wouldn't fit properly either. If anyone has one and can confirm a half hood would still fit ok it would help my decision because otherwise it's a relatively nice unit Link to comment Share on other sites More sharing options...
SM25T Posted September 30, 2020 Share Posted September 30, 2020 ............Low level Link to comment Share on other sites More sharing options...
mandalman Posted September 30, 2020 Author Share Posted September 30, 2020 Sorry, hit post before I had completed message Link to comment Share on other sites More sharing options...
SM25T Posted September 30, 2020 Share Posted September 30, 2020 Could you reposition it under the roll bar. That's where mine is mounted. Can be seen through the cut out in the half hood. Link to comment Share on other sites More sharing options...
mandalman Posted September 30, 2020 Author Share Posted September 30, 2020 That would make a lot more sense. To be honest I'm not sure how it's attached as I didn't firt it but I'll take a look tomorrow. There are no obvious brackets Link to comment Share on other sites More sharing options...
SM25T Posted September 30, 2020 Share Posted September 30, 2020 Mine is fixed with beads of silicone sealant between the light and the roll bar. Link to comment Share on other sites More sharing options...
Windy Corner Posted September 30, 2020 Share Posted September 30, 2020 This is mine on my first car, which I replicated on No's 2 and 3 Link to comment Share on other sites More sharing options...
garybee Posted September 30, 2020 Share Posted September 30, 2020 I also have mine mounted beneath the bar. I made a bracket to attach the gopro to the front of the cage cross, gives a more 'driver's eye' view (with Tillets and lowered floors). Link to comment Share on other sites More sharing options...
brianjhall31 Posted October 1, 2020 Share Posted October 1, 2020 Fitted mine by making up a Tee bracket that mounts onto the 2 popper points (popper are still retained so Tonneau can be fitted). Very easy to route wires up and around the boot cover without cutting any holes. Does not interfere with anything and is visible with Half Hood fitted. Vertical height is the same as you will find on Boxter or MX5 so well in "eye line" of following drivers. Link to comment Share on other sites More sharing options...
Area Representative gileshudson Posted October 1, 2020 Area Representative Share Posted October 1, 2020 Mount it below the rollbar-horizontal with silicon bead and/or tie wraps and it will allow the half hood to fit with ease. This way will also stop having to obscure what little rear visibility we have backwards between the seats that some of the lower fixing options like the JAL solution can be prone to do IMHO. Link to comment Share on other sites More sharing options...
CtrMint Posted October 3, 2020 Share Posted October 3, 2020 I wrote a blog post on my JAL item if you're interested.https://www.caterham7diaries.com/post/high-level-rear-brake-light-jal Link to comment Share on other sites More sharing options...
PeterM Posted October 3, 2020 Share Posted October 3, 2020 The one available from PGM is excellent. Well made, sits below the roll bar on special brackets, very bright, easy to fit and minimal rear view obstruction. Not cheap but well engineered. Link to comment Share on other sites More sharing options...
timb2117 Posted October 4, 2020 Share Posted October 4, 2020 Hearing all the good advice, I picked one up on ebay super bright and about half the width and depth of yours I love the mounting position as it is as high as possible, and neat, and my narrower version leaves a lot of real estate for go pro.But agree with hood on its obscured at the one time when you need it most, in dull dreary wet conditions catch 22. Link to comment Share on other sites More sharing options...
murph7355 Posted November 16, 2020 Share Posted November 16, 2020 Could you just use self-adhesive, weatherproof red LED tape? You could put that almost anywhere in any length, and with a black PCB it'd look reasonably unobtrusive. May have a play with this idea over winter :) Link to comment Share on other sites More sharing options...
anthony1956 Posted November 17, 2020 Share Posted November 17, 2020 Interesting. I bought one (same as #7) to fit but never yet did the deed because it interferes with camera mounting of both GoPros (not a huge issue because I fit several of these elsewhere) and my Canon DSLR which I sometimes use... typing this it strikes me a Velcro solution might work, since when I use the big cam there's rarely any following traffic, and if there is the DSLR is pointing at it. Velcro : maybe a second strip on the rear of the ReBag.The PGM offering I will look at as their engineering I have seen (DS CRA) looks nice, if twice the price. Anthony Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now