Rasta7 Posted September 17, 2020 Share Posted September 17, 2020 I need to replace some of the poppers on my half hood. Does anyone have any recommendations on which type to use. Are the Pull The Dot type any better /stronger than the standard Caterham ones? What about the MOD type? I am assuming the studs on my windscreen are the standard Caterham type, so can I use a standard socket with all the above? Got to get it sorted before the Castle Coombe Autumn Classic. Link to comment Share on other sites More sharing options...
7 wonders of the world Posted September 17, 2020 Share Posted September 17, 2020 Give Jill a call at Soft Bits for Sevens Link to comment Share on other sites More sharing options...
Rasta7 Posted September 17, 2020 Author Share Posted September 17, 2020 Sent them an email. Just wondered if anyone had had any experience of using. Link to comment Share on other sites More sharing options...
brianjhall31 Posted September 18, 2020 Share Posted September 18, 2020 I found the products and delivery from:www.woolies-trim.co.ukVery good. Using the tool that Softbits lent me made life much easier than the hammer and punch method. Once you have set up the dimension of the squeeze you have a really neat and secure job. Link to comment Share on other sites More sharing options...
CtrMint Posted September 20, 2020 Share Posted September 20, 2020 I recently replaced various popper bases on my Sevens for black bases, so they blended in. I bought a full kit of DOT type including the stud from Trimming Shop on Amazon. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now