mattwaltham Posted June 8, 2020 Share Posted June 8, 2020 Hi allMy CSR260 is stalling when the electric fan switches inI have cleaned up the earth points- this seems to have helped a little, in that most times when the fan comes in it now misses a little, then recovers to idle. However on occasion it cannot keep going and still stallsI also tried connecting a second battery in parallel with jump leads, to test whether it was just the battery not holding its voltage- this made no differenceI have wiggled the ECU and MFU connectors and applied a little WD40, also no effectGuessing it might be a voltage issue in the engine loom being pulled low when the fan starts and the ECU not liking it, but I am not sure where to go next with it - all suggestions or solutions appreciated!Matt Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted June 8, 2020 Member Share Posted June 8, 2020 Private Message sent. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now