Brightonuk Posted May 11, 2020 Share Posted May 11, 2020 Can anyone supply me with a standard S3 dash template? I am looking to redo mine in a custom config. leaving out a couple of switches but I know if I try to wing it things will not line up.Thanks Steve Link to comment Share on other sites More sharing options...
John Vine Posted May 11, 2020 Share Posted May 11, 2020 The only sources that come to mind are Arch or CC themselves (in other words, whoever cut the original holes).LHD presumably?JV Link to comment Share on other sites More sharing options...
Tony P Posted May 11, 2020 Share Posted May 11, 2020 I made one (of the standard issue type) before drawing up a revised layout for Bruce at Arch to make a custom dash for me (I ended up cutting some of the apertures myself though). I can't be certain that I'll be able to find it in a hurry... EDIT: Ah, sorry... LHD? Would it be a mirror image of RHD or something different? Link to comment Share on other sites More sharing options...
Brightonuk Posted May 11, 2020 Author Share Posted May 11, 2020 Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD Link to comment Share on other sites More sharing options...
Brightonuk Posted May 11, 2020 Author Share Posted May 11, 2020 Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD Link to comment Share on other sites More sharing options...
Brightonuk Posted May 11, 2020 Author Share Posted May 11, 2020 Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD Link to comment Share on other sites More sharing options...
Brightonuk Posted May 11, 2020 Author Share Posted May 11, 2020 Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD Link to comment Share on other sites More sharing options...
Brightonuk Posted May 11, 2020 Author Share Posted May 11, 2020 Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD Link to comment Share on other sites More sharing options...
Brightonuk Posted May 11, 2020 Author Share Posted May 11, 2020 Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD Link to comment Share on other sites More sharing options...
Brightonuk Posted May 11, 2020 Author Share Posted May 11, 2020 Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD Link to comment Share on other sites More sharing options...
Brightonuk Posted May 11, 2020 Author Share Posted May 11, 2020 Mirror I guess I would hate to cut and drill out the gauges only to find I am 3mm off center with It would not help my OCD Link to comment Share on other sites More sharing options...
garybee Posted May 12, 2020 Share Posted May 12, 2020 OCD does seem to be an issue. Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted May 13, 2020 Leadership Team Share Posted May 13, 2020 Is there a reason why a template can't be taken from the existing dash?Stu. Link to comment Share on other sites More sharing options...
Mrp Posted May 13, 2020 Share Posted May 13, 2020 I'm thinking of changing mine does anybody know if it is a problem to disconnect the electronic speedo, does it retain the mileage etc it you leave it unplugged for a while.ThanksMrp Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted May 13, 2020 Leadership Team Share Posted May 13, 2020 Yes it will retain the mileage fine.Stu. Link to comment Share on other sites More sharing options...
Mrp Posted May 13, 2020 Share Posted May 13, 2020 Thank you Stu Link to comment Share on other sites More sharing options...
Brightonuk Posted May 13, 2020 Author Share Posted May 13, 2020 Can the mods delete all those repeat posts It was not me and I have no idea why it happened Link to comment Share on other sites More sharing options...
Brightonuk Posted May 13, 2020 Author Share Posted May 13, 2020 I did not post all those honest Link to comment Share on other sites More sharing options...
BigCol Posted May 18, 2020 Share Posted May 18, 2020 I was provided with a CAD file (.dxf I think) by a chap a couple of years ago... should be able to dig it out if it'd be of use...Edited to add... it's a .dwg file Link to comment Share on other sites More sharing options...
Brightonuk Posted May 24, 2020 Author Share Posted May 24, 2020 Huge thanks to Colin for the cad file Link to comment Share on other sites More sharing options...
BigCol Posted May 24, 2020 Share Posted May 24, 2020 Link to comment Share on other sites More sharing options...
Simon.Rogers Posted September 27, 2021 Share Posted September 27, 2021 Hi Colin Any chances of that CAD file of yours. ? Link to comment Share on other sites More sharing options...
rj Posted September 27, 2021 Share Posted September 27, 2021 Second that ;-) Link to comment Share on other sites More sharing options...
BigCol Posted September 27, 2021 Share Posted September 27, 2021 I've got Simon's email (assuming you're the Meteor Simon Rogers!) but rj, if you can DM me yours I'll get the file en route to you.(the file initially came from Roger Swift, so credit is due to him... and/or he's to blame for any inaccuracies! ) Link to comment Share on other sites More sharing options...
ECR Posted September 28, 2021 Share Posted September 28, 2021 Thanks Col ..... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now