Alan Clark Posted April 23, 2020 Share Posted April 23, 2020 Has anyone had a go at boxing in the engine bay up to and around the sump. I was thinking of using expanded aluminium. It is directional to reduce dirt ingress but maintain airflow. Link to comment Share on other sites More sharing options...
Tom_Arundel Posted April 23, 2020 Share Posted April 23, 2020 That should keep your feet warm next winter....if we are allowed out by then! Link to comment Share on other sites More sharing options...
7 wonders of the world Posted April 23, 2020 Share Posted April 23, 2020 I run the half undertray which keeps a lot of crap out Link to comment Share on other sites More sharing options...
Drumster Posted April 23, 2020 Share Posted April 23, 2020 Like this......?Done primarily in my case as the Zetec runs with an open cambelt Link to comment Share on other sites More sharing options...
Alan Clark Posted April 23, 2020 Author Share Posted April 23, 2020 Do the guys that fit a full undertray suffer from a lifting bonnet? Link to comment Share on other sites More sharing options...
Area Representative Nick Chan Posted April 24, 2020 Area Representative Share Posted April 24, 2020 I used to run a half undertray on my VX - similar coverage to Aeroscreens' setup. The engine bay was remarkably clean. I don't think there was any effect with the bonnet lifting or too much heat being trapped in there at all. i think the heat actually tries to escape along the tunnel rather than from underside of the bonnet whilst driving, obviously different when stationary. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now