Richard_420R Posted February 8, 2020 Share Posted February 8, 2020 Question above. Can the standard solid discs cope with extra heat from a higher friction pad or do people use vented discs with the Ferodo DS3000? Link to comment Share on other sites More sharing options...
7 wonders of the world Posted February 8, 2020 Share Posted February 8, 2020 its only relative to the pressure applied.... I run 9" all round with DS3000 on such a light car its no problem, the rears are likely to suffer first due to their location having a lower air flow, which can be easily addressed with a little ducting.However if your concerned I suggest running heat paint / tabs on the calipers and discs and see what that offers up in your application, you may find a subtle change in balance is required Link to comment Share on other sites More sharing options...
Richard_420R Posted February 8, 2020 Author Share Posted February 8, 2020 Excuse my ignorance but are the 9" discs you mentioned the standard solid discs for the AP 2 pot callipers?Rich. Link to comment Share on other sites More sharing options...
7 wonders of the world Posted February 8, 2020 Share Posted February 8, 2020 Yes standad discs all round Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now