2cv7 Posted January 29, 2020 Share Posted January 29, 2020 HiDoes anyone on here know if it is possible to fit a K series R300/ VHPD Exhaust manifold in a Metric chassis? RegardsElliott Link to comment Share on other sites More sharing options...
7 wonders of the world Posted January 29, 2020 Share Posted January 29, 2020 ISTR the diagonals from upper to lower chassis rails are in a different place, might have to tempt a member who runs this set up to whatsapp yuo a few photos with dimensions to you. Link to comment Share on other sites More sharing options...
2cv7 Posted January 29, 2020 Author Share Posted January 29, 2020 Cheers for the reply.The problem is the diagonal that runs up towards the top of the footwell from just behind the engine mount.I have a Powerspeed imperial manifold which does not fit and the possibility of buying a R300 system.If all fails I will get one made. Just can't afford the time needed at the moment.Elliott Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted January 29, 2020 Leadership Team Share Posted January 29, 2020 There were some K-Series cars produced using the metric chassis, I really can't believe Caterham would have done this using an all new manifold ... Link to comment Share on other sites More sharing options...
2cv7 Posted January 29, 2020 Author Share Posted January 29, 2020 The standard manifold is fine. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now