Leadership Team Mcalvert Posted February 12, 2020 Leadership Team Share Posted February 12, 2020 Duck Tape has already been mentioned so someone surely has to make a contribution re cable ties. A proper cable tie gun tensions them properly and cuts the ends off flush so you don't cut your knuckles on them next time you put you end in the engine bay Here: Link to comment Share on other sites More sharing options...
Mechanical Moz Posted February 13, 2020 Share Posted February 13, 2020 There's a special place in hell for people who don't flush cut cable ties, leaving wiring looms like rose bushes. Link to comment Share on other sites More sharing options...
Wrightpayne Posted February 13, 2020 Author Share Posted February 13, 2020 I use a pair of nail clippers to finish off the tie wraps - you can crop them really close and has a very slight curve. Link to comment Share on other sites More sharing options...
John Vine Posted February 13, 2020 Share Posted February 13, 2020 Re #53:Thanks for the tip! I'll use that in future (although I might have to purloin Mrs V's clippers).JV Link to comment Share on other sites More sharing options...
Wodybode Posted February 13, 2020 Share Posted February 13, 2020 I really like my Wera Tool Check Plus. It's pretty compact and beautifully engineered, you just have to shop around as the price seems to vary a lot.https://www.travisperkins.co.uk/multi-tools/wera-39-piece-tool-check-plus-multi-tool/p/519484Andy Link to comment Share on other sites More sharing options...
Jonathan Kay Posted February 14, 2020 Share Posted February 14, 2020 There's a special place in hell for people who don't flush cut cable ties, leaving wiring looms like rose bushes.That was the only criticism at my post-build inspection. I now use the end cutting nippers from the wallet of posh pliers.JonathanPS: When we're striking theatre sets everyone tries to save money by undoing the vast numbers of cable ties... until they've had enough and start cutting. But sometimes not everyone changes at the same time ... :-) Link to comment Share on other sites More sharing options...
tbird Posted February 14, 2020 Share Posted February 14, 2020 we have solved that problem, we only use 3 inch screws and impact drivers or Gaffa , the one exception is when using material to cover things, then its a staple gun set to Half pressure, and the same place in hell that is reserved for the none cable tie flushers is also reserved for those that leave broken bits of staple legs sticking out of flats after the strike. Link to comment Share on other sites More sharing options...
Wrightpayne Posted April 15, 2020 Author Share Posted April 15, 2020 Discovered this recently which has been brilliant to shape the new handle for a sledge hammer. I seem to remember it was about a fiver! Half round file / rasp... Link to comment Share on other sites More sharing options...
Curly Posted May 6, 2020 Share Posted May 6, 2020 As this thread has cost me significants amount of money it's time to get recommendations for the next "essential" item.Any recommendations for a thread guide - also seen it called thread pitch guide - lots on Ebay but ,I would welcome recommendations .I realise, " sadly", I might need to buy multiple ones for metric, imperial etcThanksCurly Link to comment Share on other sites More sharing options...
Edzup Ezzer Posted May 6, 2020 Share Posted May 6, 2020 I think what you are after is actually better known as a thread gauge. As you say, there are loads on ebay and they can be bought for as little as £3. I wouldn't recommend one of those but for a few quid more you should be able to buy a half decent metric and imperial set for about £10-£15. You can spend a lot more but for your probable needs a set for less than £15 should serve you well. Make sure the markings on each 'leaf' are legible. Mine cost less than a tenner years ago and are very useful but the markings are hard to read. Keeping them lightly 'oiled' is a good idea.You make no reference to measuring diameter, essential when using a thread gauge. Presumably you have that covered? If not you can pick up a reasonable vernier caliper for a similar amount. I see there's even a Moore and Wright 6" vernier (a well regarded brand) available on-line for £20 delivered, or even a Mitutoyo for under £40! Whatever you use, get one with a case. As you've already found out, acquiring the 'necessary' tools is an easy way to spend "significants amount of money" but with care you should build yourself a decent tool library. Ezzer Link to comment Share on other sites More sharing options...
Titanium7 Posted May 6, 2020 Share Posted May 6, 2020 I know the 'tinternet' will find you most information I have always found this small reference guide for all things Drills, Reaming, Threads etc., immensely useful over the years. I'm still quite analogue finding paper based information easier to read and also of the generation that was brought up using both Imperial and Metric units of measurement.I often find myself using both metric and imperial measurements on the same job when setting out! Link to comment Share on other sites More sharing options...
Mechanical Moz Posted May 6, 2020 Share Posted May 6, 2020 Not as good as physical gauges but the Thread Pitch app on Android is handy to have for identifying bolt threads. Link to comment Share on other sites More sharing options...
garybee Posted May 6, 2020 Share Posted May 6, 2020 'Presto' book at post #61 is a good reference, the ZEUS book is also handy to keep in your toolbox and what I've used for years:-https://www.amazon.co.uk/RDGTOOLS-ZEUS-CHART-LATEST-REVISION/dp/B00S9SVESM/ref=pd_lpo_60_t_0/260-1572486-7530339?_encoding=UTF8&pd_rd_i=B00S9SVESM&pd_rd_r=a1df8e18-30ae-43e6-ad28-a10f24e0b434&pd_rd_w=o8wFt&pd_rd_wg=krFYT&pf_rd_p=7b8e3b03-1439-4489-abd4-4a138cf4eca6&pf_rd_r=2ZSYQYGCA9SWR5REANRS&psc=1&refRID=2ZSYQYGCA9SWR5REANRSI wasn't aware of an android app, sounds interesting. Link to comment Share on other sites More sharing options...
7 wonders of the world Posted May 6, 2020 Share Posted May 6, 2020 #61I also have my little 'Dormer' book in the toolbox drawer - very useful Link to comment Share on other sites More sharing options...
ECR Posted May 7, 2020 Share Posted May 7, 2020 Me as well 7 wonders... Link to comment Share on other sites More sharing options...
John Vine Posted May 8, 2020 Share Posted May 8, 2020 Re #61:Presto Counsellor available as a PDF here.JV Link to comment Share on other sites More sharing options...
7 wonders of the world Posted May 8, 2020 Share Posted May 8, 2020 #66...but is doesn't have the curly page corners that takes you straight to the tapping drill page..... Link to comment Share on other sites More sharing options...
Guy Lowe Posted August 24, 2020 Share Posted August 24, 2020 Top Ball Joint Jacking/Splitting Tool from Gemzoe Motorsport, brilliant bit of kit Link to comment Share on other sites More sharing options...
Leadership Team Shortshift Posted August 24, 2020 Leadership Team Share Posted August 24, 2020 "Top Ball Joint Jacking/Splitting Tool from Gemzoe Motorsport, brilliant bit of kit"I'll second that. It's been worth very penny!James Link to comment Share on other sites More sharing options...
Wrightpayne Posted February 11, 2021 Author Share Posted February 11, 2021 So, having run out of black rubber gloves and prices seemingly sky rocketing I resorted to a pair of these for working on the seven. I was skeptical at first as I thought I'd lose the 'feel' but they have been brilliant, don't tear and no sweaty hands. I dont think I'll be going back to disposables!https://www.screwfix.com/p/site-kf120-pu-palm-dip-gloves-black-large/458fr Link to comment Share on other sites More sharing options...
elan_fan Posted April 16, 2021 Share Posted April 16, 2021 I really like these stubby allen keyshttps://uk.rs-online.com/web/p/hex-keys/1879436/?cm_mmc=UK-PLA-DS3A-_-google-_-CSS_UK_EN_Hand_Tools_Whoop-_-Hex+Keys_Whoop+(2)-_-1879436&matchtype=&pla-317985723119&gclid=EAIaIQobChMI6KPbh-iD8AIVQ-3tCh1tfAYHEAQYASABEgL-zfD_BwE&gclsrc=aw.dsAnd this angle bit holderhttps://www.screwfix.com/p/dewalt-impact-driver-pivoting-bit-holder-86mm/6113D?tc=DA4&ds_kid=92700055262507123&ds_rl=1244066&gclid=EAIaIQobChMI74yxyeiD8AIVrIBQBh2GjwD1EAQYASABEgJjovD_BwE&gclsrc=aw.ds Link to comment Share on other sites More sharing options...
Wrightpayne Posted November 26, 2022 Author Share Posted November 26, 2022 Bit of a thread resurrection! Just purchased a pair of Stanley automatic wire strippers - what a revelation! For years I've used manual wire strippers and they're a bit awkward / difficult to use in tight places and on short wires. Invariably you bash something when the insulation 'lets go'!I got mine from Screwfix - shop around for the best price.Click here to see some strippers Link to comment Share on other sites More sharing options...
Wrightpayne Posted December 7, 2022 Author Share Posted December 7, 2022 Message for John Vine....Been to Halfords twice today for magnetic spark plug sockets - the 14mm one you link to doesn't fit K series plugs as they are 16mm.The Halfords one described as 10mm is actually 16mm, Laser part number 3682 and is correct for K series plugs. Link to comment Share on other sites More sharing options...
JP Posted December 7, 2022 Share Posted December 7, 2022 Well, I've just had delivered a 41mm 1/2" drive socket, a 21mm crow's foot spanner and...an imperial hex key socket set in 3/4" drive. Took a while to find the hex socket set... Link to comment Share on other sites More sharing options...
Toby S Posted December 8, 2022 Share Posted December 8, 2022 Aka the old Longbridge ScrewdriverBest tool in the box Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now