paisesmediterraneos Posted December 22, 2019 Share Posted December 22, 2019 Do you know a product to apply to the car to protect the paint against small stones?, it's beginning to appear some marks made by small stones in the sides of the car and the rear wings. Do you know a product that I can use, as amateur (only with a soft cloth, not using any special tool) to protect the paint against small stones?.Thanks, David from Spain. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted December 22, 2019 Member Share Posted December 22, 2019 Protective film, from the archives.Jonathan Link to comment Share on other sites More sharing options...
paisesmediterraneos Posted December 22, 2019 Author Share Posted December 22, 2019 Thank you Jonathan, I didn't know about protective films...very interesting option!!.Do you know if products like Autoglym Ultra High Definition Wax will protect also or not??. Thanks again. Link to comment Share on other sites More sharing options...
aerobod - near CYYC Posted December 22, 2019 Share Posted December 22, 2019 No wax or coating that can be applied with a cloth will give any protection against stone chips, clear plastic film is about the only solution if you want the original paint to be visible. Link to comment Share on other sites More sharing options...
DaveMorris Posted December 22, 2019 Share Posted December 22, 2019 David, where are you based in Spain ?Dave (Oswestry, Shropshire, . . . .. occasionally in Bilbao and Sant Celoni). Link to comment Share on other sites More sharing options...
7 wonders of the world Posted December 23, 2019 Share Posted December 23, 2019 or if its a new car order - don't paint it and save weight too Link to comment Share on other sites More sharing options...
NeilCSR Posted December 23, 2019 Share Posted December 23, 2019 I'm in the process of getting all four wings and nosecone wrapped with clear film, too many stonechips in these vulnerable areas and this will help. Being done by Dale at UlitmatePaintProtection so will report back when completed.Rest of bodywork is polished and coated with one of the hydrophobic nano coat products - have tried a couple which have been OK but will be trying several others. Aim to get a good long-lasting finish that's easy to wash.Not that I'm being too OCD about a 'pristine' finish, rather I'm too lazy to spend lots of time dealing with chips and then washing/polishing everything again and again. Want to make life easy so more time on the road....Neil Link to comment Share on other sites More sharing options...
Area Representative Geoff Brown Posted December 23, 2019 Area Representative Share Posted December 23, 2019 The trouble with your location is that these guys will not be able to apply it for you as it does require some previous experience unless you practice!Dave at Premier Paint Guard produces ready cut kits for DIY application - https://premierpaintguard.com/https://www.lotus7.club/membership/special-offers-members/ultimate-paint-protectionhttps://www.lotus7.club/membership/special-offers-members/premier-paint-guard Link to comment Share on other sites More sharing options...
paisesmediterraneos Posted December 23, 2019 Author Share Posted December 23, 2019 Dave, I am based in Granada, south of Spain.I think I won't find anybody here where I live to install protective film and I think it's better I won't do it by myself, as I never had experience with vinyls and protective films and I never saw with my eyes how it is applied .I would like to protect overall the rear wings, they are becoming touched by small stones in the area close to the upper side of the stainless steel protectors and in the outside edges. Link to comment Share on other sites More sharing options...
Area Representative Geoff Brown Posted December 24, 2019 Area Representative Share Posted December 24, 2019 With care you could apply the long rear wing film yourself. This pre cut item extends to the top mid point of the wing. The film is pre cut in such a way that it will assume the three dimensional curves of the wing.Give it a go ....it can only result in failure!! Link to comment Share on other sites More sharing options...
John Vine Posted December 24, 2019 Share Posted December 24, 2019 I would like to protect overall the rear wings, they are becoming touched by small stones in the area close to the upper side of the stainless steel protectors and in the outside edges.You might want to consider the wrap-around carbon-fibre guards sold by Jon Vicker at Millwoods:JV Link to comment Share on other sites More sharing options...
paisesmediterraneos Posted December 24, 2019 Author Share Posted December 24, 2019 Maybe you are right Geoff, I can try it. If it results in failure, will be easy to remove the film??, didn't the adhesive product damage the paint??.I was watching PPG web, they have two options, "rear mudguard large" and "rear mudguard L shape", what's the difference between them?, do both of them have the pre cut to save the stainless steel protector mounted from factory?. John, the carbon fiber protectors are very nice but I want to leave the car original (2003 1.6k Roadsport) and it mounted the classic stainless steel protectors from factory. Thank you again. Link to comment Share on other sites More sharing options...
John Vine Posted December 24, 2019 Share Posted December 24, 2019 The "large" is intended for wings without the stainless protector, whereas the "L-shape" has a cut-out so that it fits around the protector.JV Link to comment Share on other sites More sharing options...
Area Representative Geoff Brown Posted December 24, 2019 Area Representative Share Posted December 24, 2019 But the carbon needs to be protected otherwise that will suffer from road rash........?I covered the standard carbon stone protectors with film during my build. Link to comment Share on other sites More sharing options...
John Vine Posted December 24, 2019 Share Posted December 24, 2019 You're right, Geoff. I didn't do that and I regret it (a bit, at least), although they're a lot more durable than paint!The LH one suffered a mighty blow from a rock while touring in France. Luckily, Eric at Millwoods had a second-hand one that he fitted during the annual service. Top man.JV Link to comment Share on other sites More sharing options...
DaveMorris Posted December 24, 2019 Share Posted December 24, 2019 I've gone mad and have CF Millwoods protectors WITH PPF ON TOP of the CF.The PPF extends about 50mm above the top edge of the CF wing protector.David, I can probably mail you some PPF . . slightly thicker than that which Dave and others now use . . but something which you could practice with.You just need two solutions that you can spray onto the PPF and the surface that you're applying it to.One is a 5-10% solution if IPA. (the "sticker" ).The other is a1-2% solution of liquid soap. Then you need some type of applicator . . but some sort of rubberised squee-jee generally works. I have somewhere some brief instructions that I got from Dave W at PPG in a kit that he sent me some time ago. The good thing about PPF is that if it's looking bad or going wrong as you're applying it then you can just remove it, and bin the waste. Unfortunately good quality PPF is not cheap stuff to buy.(To be honest - when I had my whole car done recently I paid Dave to do it. Simple bits I'm, sort of, OK at but complex curves are not for the faint hearted.)Let me know via PM if you want some sending to Spain.Dave Link to comment Share on other sites More sharing options...
SM25T Posted December 25, 2019 Share Posted December 25, 2019 My car has had CF stoneguards for over 100k miles. Not a mark on them. Link to comment Share on other sites More sharing options...
John Vine Posted December 25, 2019 Share Posted December 25, 2019 Re #17:That's impressive, Ian. What make or brand, and are they the wrap-around style?JV Link to comment Share on other sites More sharing options...
7 wonders of the world Posted December 25, 2019 Share Posted December 25, 2019 Jon's wrap around CF arch guards are a lovely piece of kit however as with anything they do suffer gravel rash.Best thing to protect the rear arches is a pair of well made flaps on the front arches. Link to comment Share on other sites More sharing options...
SM25T Posted December 25, 2019 Share Posted December 25, 2019 Mine came with the car. Just flat. Guessing CC originals as part of the black pack ? 2002 build. Edit ... I also have very long CF front wings. Link to comment Share on other sites More sharing options...
CycleSi Posted December 26, 2019 Share Posted December 26, 2019 I tried to find somebody in the south (I am based between London and Oxford) to fit PPF and it took me ages, but I finally discovered these people and they did an excellent job so I can happily recommend them. The contact there is JP:http://www.ultimatecardetailing.co.uk/They are in Watford. Link to comment Share on other sites More sharing options...
Area Representative Geoff Brown Posted December 28, 2019 Area Representative Share Posted December 28, 2019 paisesmeditteraneos - If you make an error - I know expensive + expletives.You can remove the offending film with a hair dryer turned up to max. Slowly & carefully peel off otherwise it will stretch & tear going horribly brittle. Then clean up the remaining adhesive CAREFULLY with either white spirit or meths but using a clean soft cotton cloth. Continually change the cloth to avoid paint damage. Then clean with warm soapy water.Had to go through this process when I decided to re lacquer my CF cycle wings as I had narrow protective film strips on the leading edges. Did not reapply after the spray job! Link to comment Share on other sites More sharing options...
elie boone Posted December 28, 2019 Share Posted December 28, 2019 It would not to everyone's taste but what about mudflaps on the front wings ? Link to comment Share on other sites More sharing options...
7 wonders of the world Posted December 28, 2019 Share Posted December 28, 2019 I agree #19 Link to comment Share on other sites More sharing options...
elie boone Posted December 28, 2019 Share Posted December 28, 2019 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now