old gimmer Posted November 26, 2019 Share Posted November 26, 2019 Please can anybody tell me the size and thread for the lower rear damper bolt . Thanks. Link to comment Share on other sites More sharing options...
Wrightpayne Posted November 26, 2019 Share Posted November 26, 2019 Manual says 1/2unf X 5”. 60 ft lbs torque Link to comment Share on other sites More sharing options...
Simon.Rogers Posted November 26, 2019 Share Posted November 26, 2019 That will be the bolt for the through the centre of the tube mount.The lower mounting point will be much shorter. Link to comment Share on other sites More sharing options...
StevehS3 Posted November 26, 2019 Share Posted November 26, 2019 1/2" UNF. Approx 62mm long. Link to comment Share on other sites More sharing options...
Wrightpayne Posted November 26, 2019 Share Posted November 26, 2019 Simon,well spotted - just checked the amendments and its 1/2”unf x 2 1/2” for the under tube mount. Uses plan washer either side of the damper and lock washer under the bolt head.If an old dedion tube also check the integrity of the lower mount particularly where its welded to the tube - early versions can peel out. Later versions have a thicker walled tube and extra buttress plate welded on.Ian Link to comment Share on other sites More sharing options...
old gimmer Posted November 26, 2019 Author Share Posted November 26, 2019 Thank you very much for the information Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted November 27, 2019 Member Share Posted November 27, 2019 Looks as if this one is solved.In case anyone hasn't found these yet: Bolt List and Fastener Packs.Jonathan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now