p.mole1 Posted August 29, 2019 Share Posted August 29, 2019 Std clutch plate Ford X/Flow OHV Kent 190mm C752AF this is from Burtons Is this the corect clutch for the K series mated to the 6 speed box.Or there is this Helix HD clutch plate 190mm 7/8"x20 spline: Ford X/Flow OHV Kent RWD & 1.6 SOHC Pinto (not GT) 70-1606 also from Burtons Link to comment Share on other sites More sharing options...
garybee Posted August 29, 2019 Share Posted August 29, 2019 It can't be the 2nd. Your input shaft will be 1" 23 spline.Edit: just looked at Burton's site. The 1st one (C752AF) also looks like a 7/8", 20 spline friction plate. Link to comment Share on other sites More sharing options...
garybee Posted August 29, 2019 Share Posted August 29, 2019 Yours will be this style:-https://www.burtonpower.com/catalogsearch/result/?q=190mm+23+spline+clutch Link to comment Share on other sites More sharing options...
p.mole1 Posted August 29, 2019 Author Share Posted August 29, 2019 Many thanks, I might as well replace it whilst the engine is out Link to comment Share on other sites More sharing options...
garybee Posted August 29, 2019 Share Posted August 29, 2019 No problem. It's certainly worth a good look to ensure it's in good condition. Depends how tight you are. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now