auyt Posted August 19, 2019 Share Posted August 19, 2019 After two , one hour blats up the Tollway yesterday, whether its because it was the first time on the the road at a constant speed in fast flowing traffic ( 110Ks... honest), the exhaust fumes in the car seemed higher than I would liked.My car is an 85 with only high density foam over the pedal pivots.The Engine is a just run in LOTUS Twin Cam with the exhaust exiting the rear not the side. There are no exhaust leaks and the engine has a catch tank breather on the dry sump. tank.I also had the Hood roll attached to the roll bar and the car has roll bar mounted head rests, and I had the side screens on.Given the air turbulence I am wondering if the side exhaust is better in this regard? Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted August 19, 2019 Member Share Posted August 19, 2019 Could it be petrol rather than exhaust?Have you got the results of a recent exhaust emissions test?Jonathan Link to comment Share on other sites More sharing options...
harrebe Posted August 19, 2019 Share Posted August 19, 2019 Definitely. A few years ago I moved the exhaust from the back to the side after a lot of complaints from the wife. Due to the turbulence at high speed, the exhaust fumes are turning inwards. Link to comment Share on other sites More sharing options...
Ed White Posted August 19, 2019 Share Posted August 19, 2019 Have you tried rotating the exhaust can to point the tailpipe into more of a "draft" to get rid of the fumes. Link to comment Share on other sites More sharing options...
MADMALC Posted August 19, 2019 Share Posted August 19, 2019 It may be crank case fumes, My Xflow used to breath 'heavily' and I had a breather pipe from a sealed catch tank leading down and under the car to stop me from choking to death. Just a thought that may help. Link to comment Share on other sites More sharing options...
Sooty Posted August 19, 2019 Share Posted August 19, 2019 Madmalcs argument makes sense. What crankcase breathing have you got?Standard was to route via a small breather can under the rear carb I to the inlet manifold but a much better option is to route into the rocker cover at the front end and another to exit at the rear into a catch tank to catch and condense oil suspended leaving drier air to vent below the car.Did this on my 89 xf 18 years ago and no fumes. PM me if you want photos Link to comment Share on other sites More sharing options...
auyt Posted August 19, 2019 Author Share Posted August 19, 2019 Thanks guys some very valid suggestions and ones I hadn't thought of.JonathanCould it be petrol rather than exhaust? good thought... there a breather on the tank that just vents to atmosphere Weber Mixtures are still being sorted.Have you got the results of a recent exhaust emissions test? .....not necessary here... thank goodness, having said that I am doing the tune of the engine myself, 11:1 comp BRM valved and ported head D type cams. Im using an Innovative motor sport Wide band 02 reader great toy. The Engine has 12.5 ratio at 3,000 rpm up (very happy with that) but at the transfer point at 2.500 that needs more adjustment, but Idle is side and pump jets I am happy with. But will tweak them further when I get a 02 plug put in the exhaustharrebe The side exit is in serious consideration. but oddly they are illegal here as the fume may come in the side windows.... My friends ex Japan has one and they didn't make him change it when it came into the country!MADMALCIt has a breather catch tank with a K&N type filter so moving the filter its self may be an idea.SootyInteresting idea however its a drysump Twin Cam and filler and breather are reworked Again Guys thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now