Sooty Posted July 3, 2019 Share Posted July 3, 2019 So, nosecone back from the painters after brief ovine meeting on the Fish & Chip run. Can someone take a measurement for me please from the front of the nosecone to the centre of the badge. I understand CC put a dimple in the standard position but no such guidance on mine from Redline Link to comment Share on other sites More sharing options...
SM25T Posted July 3, 2019 Share Posted July 3, 2019 S3 or SV ? Link to comment Share on other sites More sharing options...
Sooty Posted July 3, 2019 Author Share Posted July 3, 2019 S3 Link to comment Share on other sites More sharing options...
Area Representative Golf Juliet Tango Posted July 3, 2019 Area Representative Share Posted July 3, 2019 David192mm to bottom edge. Measured after taking the photo, positioned a little more carefully. Link to comment Share on other sites More sharing options...
Wrightpayne Posted July 4, 2019 Share Posted July 4, 2019 Would dimension from the bonnet line be more accurate reference point? 373 mm on mine - bonnet line to badge centre using a plastic ruler so bends to the curve of the nose cone. Link to comment Share on other sites More sharing options...
Sooty Posted July 4, 2019 Author Share Posted July 4, 2019 Thats great thank you Link to comment Share on other sites More sharing options...
Mrp Posted July 4, 2019 Share Posted July 4, 2019 Hi SootyGlad you got it sorted after the altercation with the sheep. Mrp (Black with white stripe behind you at the time) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now