Paul Oggelsby Posted June 9, 2019 Share Posted June 9, 2019 Evening all, just bought my first Caterham and aiming to take it to my local track at Bedford shortly for a track day.Does anyone know the unmodified noise levels from a 420R, I’m concerned it’s too loud for the low limits? Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted June 9, 2019 Member Share Posted June 9, 2019 Welcome.Previous discussion, which might have what you need and lists some other 420R owners.Full search of the archives.Jonathan Link to comment Share on other sites More sharing options...
StevehS3 Posted June 9, 2019 Share Posted June 9, 2019 Hi, when I was at Bedford there was a R400 Duratec (same engine?) which must have passed the static test but was being flagged on the drive-by sensors. He finished the day but had to back off on the revs. Link to comment Share on other sites More sharing options...
ScottR400D Posted June 9, 2019 Share Posted June 9, 2019 I have a 2015 R400 with RBTBs, standard side exhaust and have no problems on TDs. It’s usually about 100dB static, never thought about drive by. Mine is an SV so the air intake is under the hood, which might make a small difference. Link to comment Share on other sites More sharing options...
Paul Oggelsby Posted June 11, 2019 Author Share Posted June 11, 2019 Thanks all, seems the only concrete way is actually going there and testing it. I've tested it using an app on my phone and revving inside the car it tops out at 110dB! Link to comment Share on other sites More sharing options...
StevehS3 Posted June 11, 2019 Share Posted June 11, 2019 I’ve done Bedford quite a few times with Javelin and they certainly don’t want to send anybody home. If you trigger the drive by sensors you would get a warning which means back-off on the revs [in certain places where the sensors are]. As you say, the only way of really knowing is to try. Link to comment Share on other sites More sharing options...
seriouspete Posted June 13, 2019 Share Posted June 13, 2019 I have a duratec on TB, Carbon airbox and a Raceco.i pass the static at Bedford easily, but i have to hold the revs (a little) past the sensors.i think the “larger” raceco and a little sound deadening in the carbon airbox may just tip me under the drive by.when you go, start a 5,000rpm and build revs gently until you get a sound warning board and then drop back, it’s also a great way to learn the circuit if you’ve not been before. pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now