finmac Posted April 6, 2019 Share Posted April 6, 2019 Rev counter not working on my recently refreshed stack dash equipped CSR. What to check please? Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted April 6, 2019 Member Share Posted April 6, 2019 Has it ever worked since the refresh?Have you got the specific wiring diagrams for the Stack dash and the CSR: let me know if not and you'd like them.Jonathan Link to comment Share on other sites More sharing options...
rj Posted April 6, 2019 Share Posted April 6, 2019 That you have the signal from the ECU on pin A at the 19 way MIL connector - the wire probably is white with a black tracer.You may also want to check the setup of the dash - there could be a hint or two to be found in the manual, which I've uploaded to my server and can be found here:www.regins.dk/Caterham/st8130manual.pdfBeaten by JK Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted April 6, 2019 Member Share Posted April 6, 2019 But yours are online! :-)(All of the diagrams will be uploaded as soon as I've got them catalogued in a way that makes some sense.)Jonathan Link to comment Share on other sites More sharing options...
rj Posted April 6, 2019 Share Posted April 6, 2019 That's going to be a challenge.I'm not sure I've got the diagram for a CSR, but I expect it to be more or less the same as for an S3 EU3 when it has a Stack dash Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted April 6, 2019 Member Share Posted April 6, 2019 !Jonathan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now