adz Posted January 24, 2019 Share Posted January 24, 2019 Hi,swapping gearbox on my duratec I took the clutch cover off to measure clutch plate (AP 5352) wear, but the build manual doesnt mention the torque for these bolts.Anybody know what they should be?thanks Link to comment Share on other sites More sharing options...
rj Posted January 24, 2019 Share Posted January 24, 2019 What size are the bolts. It may be the same as for a K-series. (Which I'll have to look up anyway) Link to comment Share on other sites More sharing options...
adz Posted January 24, 2019 Author Share Posted January 24, 2019 I think they are M8 Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted January 25, 2019 Support Team Share Posted January 25, 2019 If I remember correctly it's about 11 lbft. Link to comment Share on other sites More sharing options...
rj Posted January 25, 2019 Share Posted January 25, 2019 I think the K-series has M7 bolts but will have to check. I don't think I've ever seen a cover held by M8 bolts yet. Link to comment Share on other sites More sharing options...
John Vine Posted January 25, 2019 Share Posted January 25, 2019 I'm pretty sure all Duratec clutch covers use M8x16 bolts, torqued to 25Nm (18 lbft).JV Link to comment Share on other sites More sharing options...
ECR Posted January 25, 2019 Share Posted January 25, 2019 And a dab of Loctite for me....... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now