BeingOriginal Posted January 18, 2019 Share Posted January 18, 2019 As part of the winter tidy up I’m having a look at the wiring in the car.To give some background the car had a new crossflow loom plus scholar engine loom matched to a dash2 dash when it was rebuilt, it has no screen and a very simple dash layout and as such there’s quite a lot of redundant wiring. My aim is to remove everything unnecessary, put a couple of neater solutions in place for things like resistors and also fit a lambda sensor.I’m not 100% confident with wiring (keen to learn more) but wanted to know what others have done, I’m happy to pay for someone’s time or find a recommended mobile automotive electrician to go through and check everything if that’s the way to go.I’ve already resolved some obvious things but below are some examples of things I still need to sort. 300ohm resistor to allow dash to read signal Link to comment Share on other sites More sharing options...
Paul Deslandes Posted January 19, 2019 Share Posted January 19, 2019 Sorry to be pedantic but that looks like a 33 Ohm resistor, orange, orange, black. The silver band means it's 10% tolerance. 330 would be orange, orange, brown. On a four band code the third band is not a number but indicates the number of zeros after the two digits. With five bands the first three bands are numbers, the fourth is the decade multiplier and the fifth tolerance.See here for more info.Apart from tidying up the wiring it's really helpful if you document what you've done and, where there are any components buried in the loom, their type, value, function and location so, when you come to fault find you won't have to try to remember what you did. Photos are good too.Well worth removing the scuttle if not already off.Good luckPaul Link to comment Share on other sites More sharing options...
BeingOriginal Posted January 19, 2019 Author Share Posted January 19, 2019 Thanks for the reply PaulResistor is definitely brown but clearly hasn't photographed well.car is fully dissembled and I’ve been photographing and dynamo labelling everything as I go, it was my fear that I’d never be able to fault find an issue that started the project! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now