Molecular--Bob Posted November 5, 2018 Share Posted November 5, 2018 Hi all, anyone know what the thread type is on the adjuster end of the rover throttle cable?I want to adapt my Jenvey linkage to allow use of the Rover cable so need to drill and tap it. Thanks Ian B Link to comment Share on other sites More sharing options...
rj Posted November 5, 2018 Share Posted November 5, 2018 Shouldn't be too dificult. Bet it's metric. If you count 10 threads, you can get an idea of the pitch; pitch will be 0.5 0.75 1 1.25 or....Sorry, not able to help further; I'm using a bike cable, a clevis and an electric joiner at the pedal end After 13 years I changed it. I have a small crossbar on the cylinder head where the outer rest.Works for me Link to comment Share on other sites More sharing options...
revilla Posted November 5, 2018 Share Posted November 5, 2018 M8 X 1.25mm Link to comment Share on other sites More sharing options...
Molecular--Bob Posted November 6, 2018 Author Share Posted November 6, 2018 Thanks all, just had this confirmed by Dave Andrews, just need to buy the correct tap drill, already have the right tap. Link to comment Share on other sites More sharing options...
rj Posted November 6, 2018 Share Posted November 6, 2018 That'll be 6.8mm should you not know. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now