Paul Bowden Posted March 5, 2003 Share Posted March 5, 2003 Just suppose I wanted to paint my helmet. No not that one. The racing type. What type of paint is OK. I am aware that some types of paint may destroy the helmet it's self. Any one done a DIY paint job on their helmet. Link to comment Share on other sites More sharing options...
Dickie Normuss Posted March 5, 2003 Share Posted March 5, 2003 *eek* Seek forgiveness, not permission. Link to comment Share on other sites More sharing options...
Bob_r Posted March 5, 2003 Share Posted March 5, 2003 Paul, as I under stand it, thermoplastic type helmets(generally cheaper types) should not be painted, nor is it wise to put stickers on these. I'm pretty certain that if a helmet is Snell or FIA approved it won't be this type. I think Fibre glass and other laminated helmets can normally be painted - but it's difficult to get a good finish, personally if you wanted to do this I would recommend using a profesional service. Also remember that any approval stickers on the exterior will be lost, so ensure all approvals are clearly labelled inside the helmet. Bob Blatting around Bucks Link to comment Share on other sites More sharing options...
rynicolson Posted March 6, 2003 Share Posted March 6, 2003 Bob, contact Viper Paints, Pitt Street edinburgh... this is a speciality of theirs, speak to Kenny and he will recommend / advise. Sorry not got the no. to hand but should be available on directory enquiries... P.S. Their work is exceptional. Tricks...aka darstardly Y57 CDS "Mutley" Link to comment Share on other sites More sharing options...
Joe 90 Posted March 6, 2003 Share Posted March 6, 2003 Helmets should only be painted by approved painters because of the possibility that the solvents will soften the plastic. 99,700 miles so far Link to comment Share on other sites More sharing options...
flick Posted March 8, 2003 Share Posted March 8, 2003 Hi Paul There is a Company near Bury St Edmunds called JLF Designs Speak to Jason Fowler or try his website www.jlfdesigns.com Regards Kevin SIlcock Link to comment Share on other sites More sharing options...
Paul Bowden Posted March 9, 2003 Author Share Posted March 9, 2003 Thanks Guys *thumbup* Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now