Tazio Posted September 29, 2018 Share Posted September 29, 2018 Could anyone tell me the bottonm bolt length for the rear shock absorber for a through the de dion bar fitment, the ones I have been supplied with are 5 1/2 inches wrong and just dont look right, seem at least 1/2 an inch too long! Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted September 29, 2018 Member Share Posted September 29, 2018 From Shaun's bolt list: From the Assembly Guide:but from the same document:???If yours looks 1/2" too long it should probably be 1/2" UNF x 5".Jonathan Link to comment Share on other sites More sharing options...
ncm Posted September 29, 2018 Share Posted September 29, 2018 5 1/2 inches is specified in both the manual and build sheet for a 1990 spec car.Brian. Link to comment Share on other sites More sharing options...
Tazio Posted September 29, 2018 Author Share Posted September 29, 2018 Thanks both, when I try fitted them it was to close to the outer CV boot, so have used some spacer washers to back it off a little. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now