juleslid Posted July 29, 2018 Share Posted July 29, 2018 I feel a bit of a fool, I built the car but can't see how to tighten up the alt belt! Or is it automatic, tensioned by the thing at the top right of the engine when looking at the engine from the front?There is a little bit of a new noise from the engine, not a full-on squeal yet, that seems to increase with electrical load, so the obvious place to start would seem to be the alternator belt. But the alternator is fixed into position, which left me scratching my head? Any thoughts?Car is a late 2009 Roadsport 175.Thanks, and apologies if I've missed a previous thread.Jules Link to comment Share on other sites More sharing options...
John Vine Posted July 29, 2018 Share Posted July 29, 2018 The belt is tightened automatically by the spring-loaded tensioner. To release the belt, turn the hex centre anticlockwise with, IIRC, a 17 mm ring spanner.I'll give some thought to the "new noise".JV Link to comment Share on other sites More sharing options...
juleslid Posted July 30, 2018 Author Share Posted July 30, 2018 Thanks for that John, I suspected that might be a tensioner, therefore the belt tension will not be adjustable by me.The belt looks healthy enough, though it is the original. I suppose the next course of action will be to remove the belt and check that the alternator, and the other pulleys, all rotate cleanly.And yes, you were right, the bolt through the pulley on the tensioner is 17mm..Jules Link to comment Share on other sites More sharing options...
juleslid Posted September 8, 2018 Author Share Posted September 8, 2018 I know it is only polite to finish with the successful conclusion to a posted problem, but all I can say is that the noise has become less noticeable of late so I've shelved it until something happens! Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted September 9, 2018 Member Share Posted September 9, 2018 You might be able to localise the residual sound with a stethoscope, either bought or DIY.Jonathan Link to comment Share on other sites More sharing options...
revilla Posted September 9, 2018 Share Posted September 9, 2018 A metal rod / long screwdriver and a tin can works as well as anything. As a stethoscope that is, not as a belt tensioner. Link to comment Share on other sites More sharing options...
juleslid Posted October 3, 2018 Author Share Posted October 3, 2018 Very rude to leave a thread unfinished, so here's the update:The noise was infrequent and unintrusive so I was soon able to ignore it. Then I made the long haul trip down to see the 2 Steves recently (quite an experience, engine lovely now) and Steve G picked it up at the end of the job with the final conclusion being that it was probably the water pump making occasional noises.So, that will probably become a winter job now, has anybody else come across this problem?Planning ahead, has anybody found a good book to help with working on Duratecs, such as a Haynes Mondeo or something? The build manual stops at how to bolt it in!Cheers, Julian Link to comment Share on other sites More sharing options...
ChrisC Posted October 3, 2018 Share Posted October 3, 2018 Try https://workshop-manuals.com/ford/mondeo_2007.5_02.2007/mechanical_repairs/3_powertrain/303_engine/303-03b_engine_cooling_2.0l_duratec-he_(mi4)-2.3l_duratec-he_(mi4)/description_and_operation/diagnosis_and_testing/general_procedures/removal_and_installation/coolant_pump/Hope this helps Link to comment Share on other sites More sharing options...
juleslid Posted October 5, 2018 Author Share Posted October 5, 2018 Thanks Chris, that's very helpful. Looks like a reasonably straightforward job, doesn't even seem to need a gasket, if I read it correctly.Looking at your link, it would seem to suggest that a Haynes manual covering 2007 Mondeos should be good for our engines...Cheers, Julian Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now