K Series DS Bracket Dowel - What size? Source?

[shn7]

Having recently removed the dry sump pump bracket from my K series engine I've found it is missing one of the dowels that locates it on the block.

Does anyone have a spare, know the size and or a source for a replacement please?

I've had a look on CC's parts shop but these don't seem to be listed.

 

Thanks.

[revilla]

I'm not that familiar wit the dry sump pump, but I believe it mounts to the block where the power steering pump would go on a Rover. The power steering pump uses these: https://rimmerbros.com/Item--i-CDU1792 (in fact it looks like most of the accessory brackets used the same dowels, it's the standard fitting that all the anchor points are machined to). Hope that helps.

[Englishmaninwales]

Just checked, the alternator mounting bracket has the same size roll pin and is 13.4mm diameter when fitted ie compressed.

[shn7]

Thanks, both equally helpful.

 

Problem solved by an enginery friend who kindly decided to make me one this afternoon :-)

 

Still, another useful entry in the blatchat archives.