BJ Minno tow height

[OrangeSLR]

My 4x4  towbar is 150mm higher than the tow hitch on my trailer for a level load. I've seen somewhere a spacer tha goes between the A frame and tow hitch, any ideas where I can get one as I cant see any reference to it on the BJ website. Or any other ideas anyone??

[Paul Deslandes]

the normal method is to use a drop plate on the tow vehicle.  This bolts vertically onto the vehicle hitch bolt holes and has pairs of holes for the ball hitch at different heights to suit the trailer.

e.g.

https://www.fieldfare.co.uk/maypole-zinc-plated-4-inch-drop-plate.html?source=googlebase&gclid=Cj0KCQjwpvzZBRCbARIsACe8vyL_o5k8SOBlgF1ZBFo27uu2jcszUzPegHJesaj4ZIrxeCa4CP4mTnAaAjyAEALw_wcB

[Drumster]

I used a drop plate on my CRV and it works fine. There is a rather large spacer that BJ sells but I guess that's a more expensive option. See photo on last post on this thread

[OrangeSLR]

Yes that would be easiest but only gives 100mm and I need to drop 150mm

[OrangeSLR]

I think I need the drop plate and the spacer but can’t find the spacer on sale anywhere.

[Drumster]

I've always thought the BJ website a bit limited when searching for parts and just call them instead. Always found them very helpful.....