Doug phillips Posted July 3, 2018 Share Posted July 3, 2018 What is thought to be the best way to get it in without a press, just normal garage tools ?Thanks Link to comment Share on other sites More sharing options...
SM25T Posted July 3, 2018 Share Posted July 3, 2018 Rubber lube or liquid soap ? Vice or sash clamp or stud and big washers and nuts. Link to comment Share on other sites More sharing options...
Jonathan Kay Posted July 3, 2018 Share Posted July 3, 2018 Crossed with #2. SNAP!Lubrication + clean the inside face + the trick with the socket and the washer and the threaded rod or big bolt?Jonathan Link to comment Share on other sites More sharing options...
Area Representative Geoff Brown Posted July 3, 2018 Area Representative Share Posted July 3, 2018 With a dash of vaseline (oooh!) or veg oil on the bush you should be able to manipulate the raised edge in with your fingers.The bush is a good fit but not so tight you cannot manually fit it. Link to comment Share on other sites More sharing options...
Doug phillips Posted July 3, 2018 Author Share Posted July 3, 2018 Thanks so 1 big bolt, lots of lube, and mix it in with lost of swearing, That's tomorrows job sorted out then Link to comment Share on other sites More sharing options...
Doug phillips Posted July 3, 2018 Author Share Posted July 3, 2018 I just spent 1/2 hour faffing about drilling out some big washers so that they will go over the long bolt I have, I put some washing up liquid on the bush and pushed it on past the flange.And it when all the way on, just by hand I shall just put the drilled put washers back in my box of bits I hope the rest of them are the same. Link to comment Share on other sites More sharing options...
SM25T Posted July 3, 2018 Share Posted July 3, 2018 Just get Mandy to do it. Link to comment Share on other sites More sharing options...
Doug phillips Posted July 3, 2018 Author Share Posted July 3, 2018 There speaks a man who likes to live dangerously Link to comment Share on other sites More sharing options...
SM25T Posted July 3, 2018 Share Posted July 3, 2018 She would have just got on and done it rather than messing about on BlatChat ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now