davejmitch Posted May 28, 2018 Share Posted May 28, 2018 With the help and support of some great folk here I’ve been slowly restoring my 1988 Supersprint (imperial long cockpit chassis) back to its original condition. The parts sourced on here and pointers in the right direction have helped massively towards getting the old girl back on the road, later this year with any luck. The used parts I’m still looking to source include:A roll bar with a cross brace as the current unbraced skinny one fitted looks a bit optimistic.A pair of front cycle wingsPair of headlight bracketsAn original style heater as no doubt it will be winter by the time I get her back on the roadA full hood as my 30 year old one has shrunk and gone brittleA full carpet setA supersprint rocker cover to replace the polished alloy one there currentlyA pair of 4 point harnessesAn exhaust heat shieldA gear lever rubber gaiter I’m located in Leamington Spa but will happily cover postage costs if folk have got any of these bits tucked away further afieldMany thanks, Can't wait to get the old girl back on the road!Dave Link to comment Share on other sites More sharing options...
Wrightpayne Posted May 28, 2018 Share Posted May 28, 2018 Uniroyal Rain expert 3 tyres are not much new in 185/70 13. Other owners seem to like them. Ian Link to comment Share on other sites More sharing options...
Scottart Posted May 31, 2018 Share Posted May 31, 2018 I've a spare 'increased visibility' hood - with the zipped rear window. Had a burn repair to the offside rear side screen..BM me your email address for pics.Steve Link to comment Share on other sites More sharing options...
Area Representative manningpaul Posted May 31, 2018 Area Representative Share Posted May 31, 2018 A chum of mine has a pair of black 7" headlights for sale. Blatmail me if you could be interested? Regards Paul. Link to comment Share on other sites More sharing options...
Jumpin Jack Flash Posted June 2, 2018 Share Posted June 2, 2018 Hi Dave,Being a "serial collector" of badges, I might have the right one for your car? Which type are you after? If I am right, in 1988 Caterham used the black and silver nose cone badge.There were a couple of versions. Just Super 7, or Super 7 Sprint or Super 7 HPC.Which 13" alloys do you use? On a Super Sprint LA the standard was KN Jupiter 13", on the DD the 14". Option were Revolution alloys or the Prisoner.I also have a pair of 4 point E-marked red Luke harnesses. The correct type used by Caterham in the eighties.CheersJJF Link to comment Share on other sites More sharing options...
davejmitch Posted June 6, 2018 Author Share Posted June 6, 2018 Thanks chaps, I've updated the original post as I've sourced some headlights, A grill and found the original badge that I was after. I have a growing pile of parts to take for shotblast and powder coat over the next two weeks then hopefully I can get her down from the axle stands and back on her wheels, tyres permitting!Thanks againDave Link to comment Share on other sites More sharing options...
davejmitch Posted July 7, 2018 Author Share Posted July 7, 2018 I've updated the original post again as some very nice chaps have sorted me out with tyres, rear lights, a grill and some other bits and bobs. Im starting to feel like I'm on the home run now, I've held off dropping off a small crate of parts for shot blast and powder coat incase anyones got a FIA stye imperial live axle roll bar or one with a cross brace, incase a scruffy one turns up that would benefit from a visit to the powder coaters.Let me know if you have any bits that you are looking to sell, I don't think its going to be too long until I place an order with redline for the final bits and get the old girl back on the road, cant wait! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now