R300 k throttle cable snapped

[Dellc]

I’m sure this has been coved before but the throttle cable snapped while out on a run earlier today and I’m wondering if anyone knows Where I can get one from as fast as possible.  

[SM25T]

Bicycle shop. Bike cable with same size nipple one end. Screw nipple the other end (at pedal top). Reuse the original outer sleeve. Cost a couple of Pounds. Where are you located ?

[Dellc]

Rayleigh Essex.   Cheers I’ll have a look it tomorrow 

[SM25T]

It's a gear or brake cable. My spares are a stainless cable with a Teflon coating. I got screw nipples from eBay for pennies. You can use an electrical screw connector or even a pin from a 3-pin mains plug behind the throttle pedal.

[shn7]

And to prevent this happening again fit a pedal stop so you can't overload the cable :-)

[rj]

Or simply use sympathy rather than hammering the pedal.

[7 wonders of the world]

MTB brake cable, preferably a stainless version, lightly oil the outer before inserting the new inner.

if you cant find a solderless nipple you can use 5amp choc block electrical connectors one either side of the pedal.

[7 wonders of the world]

MTB brake cable, preferably a stainless version, lightly oil the outer before inserting the new inner.

if you cant find a solderless nipple you can use 5amp choc block electrical connectors one either side of the pedal.