Benton Posted May 5, 2018 Share Posted May 5, 2018 Had a look this afternoon at wiring up my newly acquired DRE shift light.Having removed the Rev counter spotted a spare green (live) and black (earth) connector in the loom. Is there a spare black/white connector lurking somewhere else? An earlier thread suggested there was but it wasn’t obvious to me though I didn’t cut any cable ties at this stage to investigate further. ThanksSorry should have said it’s a 2018 420r Link to comment Share on other sites More sharing options...
thompster Posted May 5, 2018 Share Posted May 5, 2018 In my 2007 model (Caerbont speedo) the signal wire is taped up in the bundle that go to the tacho plug [corrected! I said speedo before]. Maybe unwind the tape (if yours is the same) and see if you can find it there. Link to comment Share on other sites More sharing options...
ChrisC Posted May 5, 2018 Share Posted May 5, 2018 Where does the factor plug the ACES shift light? Link to comment Share on other sites More sharing options...
Benton Posted May 6, 2018 Author Share Posted May 6, 2018 Looking again this morning......Took the speedo out as well as the rev counter so could have a better look around.There were three spare spade connectors of the required feed types tucked away extreme right of the dash above the light switch presumably there for the Aces unit. Fed the DRE cable through the heated windscreen grommet opening and connected up. Works a dream! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now