Molecular--Bob Posted April 25, 2018 Share Posted April 25, 2018 Anyone know the part number for the clutch hose used on the duratec with ford slave cylinder? the one I have is 38G008A, but it seems to have the wrong end form to seal in the cylinder, which requires a male fitting. Should it have an adaptor? or do I just have the wrong part. Link to comment Share on other sites More sharing options...
7 wonders of the world Posted April 25, 2018 Share Posted April 25, 2018 pretty sure CC offer a male/male adaptor......will have a look now Link to comment Share on other sites More sharing options...
7 wonders of the world Posted April 25, 2018 Share Posted April 25, 2018 https://caterhamparts.co.uk/clutch-parts/1138-male-adaptor-clutch-master-cylinder.html?search_query=clutch&results=117this was what I was thinking of but unless your hose has a female it will be no use at all Link to comment Share on other sites More sharing options...
Molecular--Bob Posted April 25, 2018 Author Share Posted April 25, 2018 The part I have has this at the slave end http://https://www.google.co.uk/search?rlz=1C1CHBF_en-GBGB790GB790&biw=1163&bih=536&tbm=isch&sa=1&ei=yuLgWqvWLqrgkgXlkbiYBg&q=caterham+clutch+hose&oq=caterham+clutch+hose&gs_l=psy-ab.3...270163.272054.0.272716.8.8.0.0.0.0.122.588.7j1.8.0....0...1c.1.64.psy-ab..0.0.0....0.vZQp-DjANc8#imgrc=G-o1PBf0dcxN7M:so not going to match the female seat in the slave with out an adaptor. But this all assumes I have the right hose in the first place. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now