Colin Grundy Posted March 2, 2003 Share Posted March 2, 2003 Plugging in what connections I can before my emerald connector arrives I have two teasers for you. I have the two MFU connectors and the 36 pin ECU connector, but there is another block connector which is similar in appearance to the 36 pin one but has only ten connectors. This branches out of the loom along with the other three but there is no mention of this in the manual, and I have no idea where it is supposed to fit. Even if I was fitting a mems ECU I thought there was only one large socket that plugged into it? help!! The second concerns the lamda connection. In the manual it states that connection is made by plugging in a 4 pin block which is rubber sleeved (oooherr). The only rubber sleeved wires I have have no connections and the ends of the wires have been covered in heat shrink. Although Ive fitted the R500 exhaust system the connector for the lambda should be the same surely? Help 2!! Thanks in anticipation. Link to comment Share on other sites More sharing options...
EFA Posted March 2, 2003 Share Posted March 2, 2003 Colin, Give me a call on 01342 316166. I was playing a similar game yesterday and I have an EU2 engine loom diagram. Fat Arn Visit the K2 RUM website See the Lotus Seven Club 4 Counties Area Website here Link to comment Share on other sites More sharing options...
Chris W Posted March 2, 2003 Share Posted March 2, 2003 Colin Look at engine13.jpg on my pictures. It shows the ECU connections clearly. Chris 1.8K SV 140hp see it here Edited by - Chris W on 2 Mar 2003 10:26:04 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now