Jump to content
Click here if you are having website access problems ×

On idle


Thornberry

Recommended Posts

950 RPM is the idle speed of the 150.

 

To get this set up properly you need the Easimap software and the correct lead.  It is a bit fiddly but a bit of time and patience will see you right.  

Lots of info on here.

 

Others I'm sure will be along shortly

 

Good luck

Link to comment
Share on other sites

150 will chug along at any revs above 2000 if set up properly but for reasonable progress use 3000 - 6000 and for rapid progress 4000 - 7200. Rev limiter is 7400 soft cut and 7600 hard cut. 150 has less mid range torque/power than the 140 but more at the top so needs to be `worked` more. You`re getting a bit excited now! Hope the weather improves, I was out with the aeroscreen on today....not great in the fog!

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...