Dickie Normuss Posted February 28, 2003 Share Posted February 28, 2003 Ok guys, a question for you. Having seen the interest in carbon fibre rear light clusters, is there anything else that you would like moulded in glass or carbon? I only ask 'cos that's what I can do 😬 I'm saving for a 7 SV so ya' know the money's going to a good home Matt Seek forgiveness, not permission. Link to comment Share on other sites More sharing options...
martinwhitcher Posted February 28, 2003 Share Posted February 28, 2003 Umm....Carbon 😬 Martin MW 51 CAT Link to comment Share on other sites More sharing options...
Paul McKenzie Posted February 28, 2003 Share Posted February 28, 2003 Anything that Caterham make at one third of the price Paul Link to comment Share on other sites More sharing options...
Chris K Posted February 28, 2003 Share Posted February 28, 2003 a set of rear wing for less than 600ukp... Now, Beakie, we'll just flip this switch and 60,000 refreshing volts of electricity will surge through your body. Ready?.. Link to comment Share on other sites More sharing options...
rgrigsby Posted February 28, 2003 Share Posted February 28, 2003 Hmmmmm just trying to work out what could be done sensibly...... Rob G www.SpeedySeven.com Link to comment Share on other sites More sharing options...
k.russell Posted February 28, 2003 Share Posted February 28, 2003 Ric How about a some sort of air box, think some of the guys were looking into this for lower induction noise. It needs to fit over foam air filter and not need bonnet mods though (and fit on my 45's) and cheaper than other high quality air boxes out there. Link to comment Share on other sites More sharing options...
Anthony Posted February 28, 2003 Share Posted February 28, 2003 VX 2.0 16V plug covers ala SBD in carbon Scuttle bulkhead ala Count/Arnie Nosecone unless Arnies Dog gets there first Trumpets for Jenveys - let me know if you need a set to allow mould to be taken Boot floor Hope that gives some useful ideas Link to comment Share on other sites More sharing options...
k.russell Posted February 28, 2003 Share Posted February 28, 2003 And what about a nice carbon cowling behind the rad to get nid of all that hot air, out of the sides of left side or top of nose exiting from a carbon duct, Nice to dream though isnt it. Link to comment Share on other sites More sharing options...
V7 SLR Posted February 28, 2003 Share Posted February 28, 2003 Carbon bonnet and scuttle please. If you can do a carbon nose and rear wings cheaply I'd be interested too. Worcs L7 club joint AO.//Membership No. 4379//Azure Blue SLR No. 0077//Se7ens List Tours Link to comment Share on other sites More sharing options...
TomGaval Posted February 28, 2003 Share Posted February 28, 2003 Carbon Clams Link to comment Share on other sites More sharing options...
greg Posted March 1, 2003 Share Posted March 1, 2003 Cockpit Gearbox cover? Greg, Q 86 NTM (Green 185BHP XF) Link to comment Share on other sites More sharing options...
Dickie Normuss Posted March 1, 2003 Author Share Posted March 1, 2003 Guys Nosecones/wings and the like could be done, but what's the score with copyright etc? Seek forgiveness, not permission. Link to comment Share on other sites More sharing options...
Dave_H Posted March 1, 2003 Share Posted March 1, 2003 A removable aeroscreen, like the Caterham one but affordable, and how about some half doors?? Dave Link to comment Share on other sites More sharing options...
dino ferrana Posted March 1, 2003 Share Posted March 1, 2003 Unless you change the design of the wings or nosecone then you could well hit copyright problems. With the scuttle/floor/bonnet you are unlikely to as Caterham don't make them in Carbon. Link to comment Share on other sites More sharing options...
The Dog In The Park Posted March 1, 2003 Share Posted March 1, 2003 I have a nosecone heavy Anthony, but the tool would need to be made. Guess I could do them for a good bit less that Caterham if a few people want them. Carbon transmission tunnels are a no no as there are too many unique types. Nigel, scuttle and bonnet are possible if there is the demand, but to be honest they (esp bonnet) would be very expensive. Made Outside Germany Link to comment Share on other sites More sharing options...
V7 SLR Posted March 1, 2003 Share Posted March 1, 2003 [sob] I know, I know.... ☹️ ☹️ ☹️ However once my wallet recovers, I'll be seeking others with a similar... er... requirement. Worcs L7 club joint AO.//Membership No. 4379//Azure Blue SLR No. 0077//Se7ens List Tours Link to comment Share on other sites More sharing options...
mav Posted March 2, 2003 Share Posted March 2, 2003 Ric, How much do you think for an aeroscreen in GRP or Carbon fot the SV, being as Caterham don't make them? Link to comment Share on other sites More sharing options...
John Gaines Posted March 2, 2003 Share Posted March 2, 2003 Ric I would be interested in an aeroscreen in carbon (at the right price!) Link to comment Share on other sites More sharing options...
murph7355 Posted March 4, 2003 Share Posted March 4, 2003 Bonnet please. And what about a scuttle with an aeroscreen moulded into it? Link to comment Share on other sites More sharing options...
fatcat Posted March 4, 2003 Share Posted March 4, 2003 FWIW, i heard a rumour that a cf aeroscreen for the SV might be under consideration at Dartford now, but I didn't hear any timescales... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now