arty Posted January 28, 2018 Share Posted January 28, 2018 Hi i need to fit a couple of fixings - press studs , to the body for the tonneau to fix to. At the moment there are a different type of fitting that i don't know what it is.Do i drill a hole and press it together? A bit like you tube shows me on the fabric but in metal?I am home tomorrow and could call someone if its easier to tell me verbally that write.I presume i have to buy a tool as wellMany thanks Richard Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted January 28, 2018 Member Share Posted January 28, 2018 Usually self-tapping screw or pop rivet. There can be a problem getting the nose of the rivet gun far enough in, but there's a trick with a nut. Previous discussions with hints, including the rivet trick.The Assembly Guide has instructions: let me know if you'd like a copy.There's a special tool for the bit that goes in the tonneau cover.Jonathan Link to comment Share on other sites More sharing options...
arty Posted January 28, 2018 Author Share Posted January 28, 2018 thanks for that Johnathan, i often struggle with the search function on here.Rich Link to comment Share on other sites More sharing options...
tangomikeromeo Posted January 30, 2018 Share Posted January 30, 2018 Where are you based Richtimms? Someone local may be able to offer a hand. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted February 4, 2018 Member Share Posted February 4, 2018 All sorted, Rich?Jonathan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now