revilla Posted January 8, 2018 Share Posted January 8, 2018 Still Available K Series Starter Spacer Ring - As New - £15 K Series Hydraulic Lifters - £15 VVC Exhaust Cam - £15 O/T 45mm Impact Socket - £2Sold to AdamQ Pair Luke 4 Point Harnesses - £50Sold to simon_h K Series Liner Shims - £8 Fuel Filler Neck - New - £5Sold to manningpaul Assorted Front Brake Pads - £20 Full Set Rear Brake Pads - £10Sold to CheshireCat Rear Light Cluster - £8Sold to paul_w Pair TRS 4 Point Harnesses - £30 Girling Brake Master Cylinder - £20 Front Springs with Dampers & Platforms - £30DIBS to OrangeSLR Brise Axial Starter for K Series - Remanufactured - £100All plus P&P at cost.Anything not sold here will end up on eBay.My email address is:For Pictures See HereDetailsPair Luke 4 Point Harnesses - £50 - PicturesRecently removed from my car, overall very good condition, some very light fraying on the edges of a couple of straps as shown the pictures. Only labels on them are the ones shown, no date codes that I can recognise but assume they are way out of date for competition use, they are probably the original belts from the car which would make them around 2003. Black, pull-down style with rotating quick release center buckles.Pair TRS 4 Point Harnesses - £30 - PicturesBough used ago, never fitted by me. Fairly old but still usable. Webbing generally in good condition, very slight fraying on a couple of edges of the webbing and some of the pads as shown in pictures. All labels as shown in pictures, dated 2003 and expired for competition use 2008. Perfectly usable in a road car or for track days.Brise Axial Starter for K Series - Remanufactured - £100 - PicturesSold to me as fresh from a remanufacture by Brise. Looks like new, see pictures. I have far too many engines in my garage and even more starter motors than engines, so I need to move one on.K Series Starter Spacer Ring - As New - £15 - PicturesCame to me as part of a job lot of parts I bought. Surplus to requirements. Quite possibly brand new, certainly doesn't look like it has seen much action.K Series Hydraulic Lifters - £15 - PicturesFull set of 16 K Series hydraulic lifters by BGA, were given to me in exchange for something else but they are for the standard K Series and NOT the VVC so they are of no use to me. Look to be very lightly used indeed. These will need planishing flat for re-use with a different cam as described by Dave Andrews here, I've done one as shown in the pictures just to show they come up fine, happy to do all the others to match to sell them for an extra £5 (in total, not each ).K Series Liner Shims - £8Brown & Gammons liner shims, raise the cylinder liners in a K Series by 0.1mm/0.004" to correct low liner conditions. Set of 4 in packet.VVC Exhaust Cam - £15 - PicturesRemoved from a good running VVC 160 to upgrade to a Piper 270. In very good condition, ready to use. Can be used as an upgrade cam for a standard non-VVC K Series. If anyone wants a pair (you can use the same cam for both inlet and exhaust when upgrading the standard K engine) then I'm sure I could dig at least another one out of my spares box.Girling Brake Master Cylinder - £20 - PicturesCame to me as part of a job lot of parts I bought. Surplus to requirements. No cap but these are cheap to replace. Never fitted by me so I can't say much about the condition of the seal; the rubber dust cap on the end is split slightly so probably best to refresh it before use. I can't say a lot else about it other than to give the part numbers. Selling cheap as it's a bit of an unknown: Pink Tag: 74066147-3-50/50-03ds Cast Into Body: GIRLING 74660152 50FCAssorted Front Brake Pads - £20 - PicturesCame to me as part of a job lot of parts I bought. From an ex-racer I believe, all very lightly used; the numbers I've written on the tapes in the photographs are the overall pad thicknesses in millimetres which are not far off new dimensions. These are to fit the standard Triumph calipers, not the AP 4-pot calipers as used on my car, so no good to me and I know little about them. Job lot of six pairs, four of which are Ferodo, the other two of which I was told were Mintex M1144s. There are no marking on them to back this up, however I was also told independently that this is correct for Mintex. Never having run standard calipers I have nothing to compare them with. Selling cheap as a job lotFull Set Rear Brake Pads - £10 - PicturesBrand new unused to fit the standard rear Sierra calipers. Brand/Compound etc. unknown, part numbers on the backs as per photographs: 3460F FF 539032 20 981.Front Springs with Dampers & Platforms - £30 - PicturesPair of Caterham Eibach front springs. Come complete with Bilstein dampers and fixed platforms. Bought so long back as spares I've lost all track of their history. They don't look to have had too much use, however as I was getting them ready and taking pictures I noticed one damper is marked as an M0 and the other an M4! No idea how signficant this is, and you could probably get Bilstein to revalve them to whatever spec you want for about £80 I believe, but because of this I'm selling them cheap as springs and platforms with free dampers!Fuel Filler Neck - New - £5 - PicturesNot sure what model this is for, certainly doesn't match up with the breaters etc. on my K Series. Pretty sure it's brand new, see photographs for details.Rear Light Cluster - £8 - PicturesStill fitted to the car. Rest of car is not included. To be removed shortly. Some light corrosion to the backplate as shown in the pictures, reflectors are still good, still working fine. Includes the entire lamp unit, proper rubber wedge (none of this new-fangled carbon rubbish), backplate, read and orange lens, even the bulbs which all work. I may however need to remove any rubber grommet from the back, and if that means chopping the connector I'll need to do that, so may come with wire tails - if I do chop the connector I'll only take a few millimetres of wire off with it.O/T 45mm Impact Socket - £2 - PicturesNew and unused, some slight corrosion from just hanging around. To the best of my knowledge, absolutely no use whatsoever for a Seven but just in case anybody has a use for one ... Link to comment Share on other sites More sharing options...
AdamQ Posted January 8, 2018 Share Posted January 8, 2018 Hi Andrew,I'll take the Luke harnesses if I may please.I'll email you shortly about payment etc.Many thanks,Adam Link to comment Share on other sites More sharing options...
simon_h Posted January 8, 2018 Share Posted January 8, 2018 Hi Andrew,I'd be interested in the filler neck and the liner shims.I'll send a PM to discuss payment and shipping costs.Cheers,Simon Link to comment Share on other sites More sharing options...
revilla Posted January 8, 2018 Author Share Posted January 8, 2018 Adam, Simon, I've responded to your messages thank you. Link to comment Share on other sites More sharing options...
Area Representative manningpaul Posted January 8, 2018 Area Representative Share Posted January 8, 2018 Hi Andrew,I would like all the pads (fronts and back) if still available.Will it be better to send via Parcel Carrier etc. due to the weight?Many thanks, Paul. Link to comment Share on other sites More sharing options...
m7cooke Posted January 8, 2018 Share Posted January 8, 2018 Hi RevillaYHMMick Link to comment Share on other sites More sharing options...
revilla Posted January 8, 2018 Author Share Posted January 8, 2018 Paul, thank you I've marked them down as sold to you. I'll probably drop everything off at an InPost locker, that usually seems to work out cheap. I'll keep costs down wherever I can. Link to comment Share on other sites More sharing options...
revilla Posted January 8, 2018 Author Share Posted January 8, 2018 Mick, I haven't received any mail from you. Can you resend please? I'll message you my email address so you can send it outside of here if there is a problem.EDIT: Mick, I think there's a problem with your mailbox. I can BM other people but if I try to send you a mail I just get a 404 Error. Link to comment Share on other sites More sharing options...
revilla Posted January 8, 2018 Author Share Posted January 8, 2018 For anyone wishing to contact me by email I've now added an image with my email address into the original post. Link to comment Share on other sites More sharing options...
m7cooke Posted January 8, 2018 Share Posted January 8, 2018 Hi Revillaam interested in the Brise starter motor, is it a straight replacement for 1.8 K ?is it in working order ?Regards Mick Link to comment Share on other sites More sharing options...
revilla Posted January 8, 2018 Author Share Posted January 8, 2018 Mick. I've replied to your email. It should be in working order but I've never fitted it. If you wanted to try it, you're welcome. If it doesn't work you can send it back. Pay me once you're happy with it. I can't say fairer than that. I won't take money off anyone for anything that doesn't work, and I wouldn't advertise anything if I had any reason to doubt it was what I said it was. I've tried to point out any faults and defects in my advert. I believe this is fresh from remanufacture by Brise themselves and had never been used since, so should be perfect. Link to comment Share on other sites More sharing options...
paul_w Posted January 8, 2018 Share Posted January 8, 2018 Hi AndrewI've mailed you about the TRS harnesses, m/cyl and springs and shocksCheersPaul Link to comment Share on other sites More sharing options...
revilla Posted January 9, 2018 Author Share Posted January 9, 2018 Hi Paul, email received, I've replied just now. All still available, all yours. Link to comment Share on other sites More sharing options...
Area Representative manningpaul Posted January 12, 2018 Area Representative Share Posted January 12, 2018 Andrew,YHMRegards Paul. Link to comment Share on other sites More sharing options...
revilla Posted January 15, 2018 Author Share Posted January 15, 2018 Really sorry that I haven't got all these parcels posted yet, afraid I'm laid up in bed with flu! Will do my best to get them all off in the next day or two. Link to comment Share on other sites More sharing options...
Area Representative manningpaul Posted January 15, 2018 Area Representative Share Posted January 15, 2018 No great Panic for me, hope you feel better and are up and about soon.Regards Paul. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now