p.mole1 Posted December 16, 2017 Share Posted December 16, 2017 I'm after a good crankshaft pulley preferably single pulley Thanks Link to comment Share on other sites More sharing options...
Slipper man Posted December 20, 2017 Share Posted December 20, 2017 As it happens I have an R500 pulley. Also a lot of other R500 parts from a compete fully dressed cylinder head, verniers etc to throttle cable . I have sold my R500 and have some of the spares that I used to keep.My email is keith@jecks.co.uk Link to comment Share on other sites More sharing options...
simon_h Posted December 21, 2017 Share Posted December 21, 2017 A spare head! Available? Link to comment Share on other sites More sharing options...
Slipper man Posted December 22, 2017 Share Posted December 22, 2017 Yup. Genuine R500 K series head, lightly breathed on by Jason Langan. Fully built up with valves, verniers, cams etc. Apparently these heads are now very hard to come by. I always kept a spare R500 engine and this is spare because I had a bottom end failure as a result of which I was left with a spare cylinder head Link to comment Share on other sites More sharing options...
Paul Mason Posted December 22, 2017 Share Posted December 22, 2017 Mail sent to above email addressCheersPaul Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now