Jim Ellis Posted February 26, 2003 Share Posted February 26, 2003 I am just about to fix six point harness to both sides of the car. I have the harnesses and also the car, just need to buy the nuts and bolts to complete the package! 7/16th UNF bolts are I believe what is required for the job, the lengths I will have to measure up, but what material and what class of bolt is required. Caterham do not supply these things separately from their harnesses, all they could say was that they should be high tensile! If any one can clarify what the correct spec is I would be grateful. Ta in advance. Jim Link to comment Share on other sites More sharing options...
elie boone Posted February 26, 2003 Share Posted February 26, 2003 Most mailorder comp. sell them like Merlin Motorsport e.a. Link to comment Share on other sites More sharing options...
Colin Grundy Posted February 27, 2003 Share Posted February 27, 2003 Jim I am sure the Caterham belts are made by Luke. Either ring them direct or somewhere like Demon Tweaks to get the fixing kit. I wouldn't recommend going out and guessing/buying non recommended fixings. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now