John E Posted February 26, 2003 Share Posted February 26, 2003 The lump will be going back in again on Sunday and I was wondering about adjustments to location. Are there any relevant measurements that need to be checked. Front to back are fixed but what about side to side. There is presumably some movement here which could be adjusted with shims on the A frame to chassis mounting and on the radius arms to chassis or shocker mounting. Or do I just put it back in without shims and just bolt it up. Run Baby Run Link to comment Share on other sites More sharing options...
Graham Sewell Posted February 26, 2003 Share Posted February 26, 2003 The only adjustment is to make sure that the axle is central in the chassis. This is done by measuring the distance between the back of the brake drums and the metal wheel arch. This measurement should be the same both sides (<3mm difference if I remember correctly - but should be easy to get it closer than that). Low tech luddite - xflow and proud! Link to comment Share on other sites More sharing options...
John E Posted February 26, 2003 Author Share Posted February 26, 2003 Many thanks Run Baby Run Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now