blueyedbiker Posted November 12, 2017 Share Posted November 12, 2017 Afternoon all, I'm using the above for an electrical supply for the fuel pump and I'm trying to work out if it is polarity conscious or not. Finished up with a headache so far. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted November 12, 2017 Member Share Posted November 12, 2017 The ones that I've seen are passive and don't care.Could you add a link to the one you're using? And confirm that it's in the usual position: in the feed from the battery to the pump.Jonathan Link to comment Share on other sites More sharing options...
blueyedbiker Posted November 12, 2017 Author Share Posted November 12, 2017 Hello Jonathan, thanks for your response, here's the eBay link; https://www.ebay.co.uk/itm/2X-Add-A-Circuit-Standard-Blade-Fuse-Splice-Holder-ATO-ATC-Piggy-Back-Fuses-Tap/152611082492?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649I've put it in the bottom position on the fuse block - "flasher unit, 10A" as it fits reasonably well there and I used another 10A fuse. When I get a mo I'll have prod around with a tester to see if I can shed light (ha) on it. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted November 12, 2017 Member Share Posted November 12, 2017 First check whether that feed to the fuse box for the flashers that you've used is switched with the ignition or not, and that's what you want.There shouldn't be any polarity problems.Jonathan Link to comment Share on other sites More sharing options...
blueyedbiker Posted November 12, 2017 Author Share Posted November 12, 2017 Mmm, that's a good call, could be the feed for the hazards I suppose. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted October 12, 2018 Member Share Posted October 12, 2018 Afternoon all, I'm using the above for an electrical supply for the fuel pump and I'm trying to work out if it is polarity conscious or not....The ones that I've seen are passive and don't care....But... I've just learned that some need to be inserted the right way round for the two fuses to work independently as intended.Jonathan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now