allan.guy Posted October 15, 2017 Share Posted October 15, 2017 I have a roadsport sv and I am looking to upgrade the mirrors I need to be able to look behind when on the road and when reversing in and out of my long drive/alley. Best options I have seen so far are there are the Demon-tweeks Pit kings fitted to the screen uprights but the compromise is you loose the ability to open the doors fully. Then there were the SPAs mounted on the brackets that member Eccles made which would have been great but he does not seem to be making these any more.Any suggestions including how to mountTIAAllan Link to comment Share on other sites More sharing options...
Jonathan Kay Posted October 15, 2017 Share Posted October 15, 2017 Have you considered two other general solutions: The panoramic assembly that goes across the top of the screen? http://www.mirrorsforsevens.com/images/specs1_picture1.jpg Video camera(s) to a smart 'phone or action camera or similar? (With the bonus of reduced drag!)Jonathan Link to comment Share on other sites More sharing options...
SM25T Posted October 15, 2017 Share Posted October 15, 2017 You soon get used to not opening the doors onto the bonnet. I fitted Large carbon effect convex mirrors from Car Builder Solutions. Rock solid mounting on to stanchion. ... need to drill 5.0mm and tap M6. Use M6-10 cap head socket set screws. Adjustable mirror heads on proper ball joints. Excellent rearward vision ... even on passenger side. I have photos but can't post here from phone. Link to comment Share on other sites More sharing options...
John Vine Posted October 15, 2017 Share Posted October 15, 2017 These are the CBS mirrors SM25T refers to. I fitted a pair some time ago -- excellent shake-free rearward vision.And I agree that you get used to the restricted door-opening. In fact, I usually remove the door from its mounting pins before exiting.Earlier discussion here.JV Link to comment Share on other sites More sharing options...
Stridey Posted October 15, 2017 Share Posted October 15, 2017 I tried the Pitking style mirrors. OkAdvantages were the great price and easy to fit on stanchion. Disadavantages: flat glass and small size meant I really couldn't see anything, huge blind spot as cars pass on motorway.I like to have a bit of my car viewable in the mirror, just a hint of rear wing for reference, so I decided to try mirrors with a convex shape. I settled on these: Kiwav on eBay. I bought from the U.K. Seller To fit I had to just enlarge one of the holes on the lower hinge to 8mm and the plastic hinge. I found I couldn't quite adjust the kerbside mirror enough so bought two in line 8mm joints from SGS engineering, These allow enough adjustment to get into exactly the right place. Then I put a dab of JB weld into the joint to fix it solid. I used an 8mm stud through the hinge/stanchion hole and a bolt the other side to fix in place. A little dab of loctite on the threads stop it undoing in the wind on motorway runs. The blue glass tint is really light and they are available in black.i find the convex lens excellent, proper viewing angles and so much safer on the motorway. The kerbside mirror is really great now too. Link to comment Share on other sites More sharing options...
Alan Reeves Posted October 15, 2017 Share Posted October 15, 2017 JK I have one of those Panoramics if anyone wants to make an offer...can go to the charity fund Link to comment Share on other sites More sharing options...
Wrightpayne Posted October 15, 2017 Share Posted October 15, 2017 Alan,I know Tazio was looking for a longacre mirror but one of those may meet the requirements. I'll ping him a message.Ian Link to comment Share on other sites More sharing options...
Sinbad Posted October 17, 2017 Share Posted October 17, 2017 Hi Stridey,Thanks for your post regarding the KiWav mirrors and the modifications that you made in order to fit them which i found very helpful.I have been looking for some nice chrome mirrors for my seven for a while now and these seem just the job.May I ask which specific pattern of KiWav mirror you got as they seem to have a wide selection available on Ebay. I saw some labeled as "KiWAV Classic MX chrome rearview mirrors CNC convex M8 x1.25 scooter moped atv" were these the ones you purchased?Also, am I correct in thinking that the inline joints from SGS Engineering that you refer to were shown as "Axial/Inline M8 Ball Stud To Fit M8 Thread" on their web site?Thanks for the info - the mirrors look great on your seven.- Paul Link to comment Share on other sites More sharing options...
Stridey Posted October 17, 2017 Share Posted October 17, 2017 Sinbad, yes those are them and the inline ball joints too. Quite a complex shape on the mirrors but I'm impressed with the viewing angle now I've used them for a few days. i also needed 2x m8 30mm studs to screw into the ball stud and then the mirror base.You'll need to loctite the joints too, to stop them drooping at motorway speeds. To drill out the stanchion I used a stepped bit. Link to comment Share on other sites More sharing options...
Stridey Posted October 17, 2017 Share Posted October 17, 2017 I just just took some more pics, so you can perhaps judge how they look with the ball joint extensions. You 'may' be able to create the same tilt needed to see better by drilling out at the joint behind the mirror itself, but for my height and seat arrangement I needed to just bring them out a bit more hence using the ball joint, fixed in place with JB Weld. Although that joint is fixed, you still have adjustment for rotation and angle with the mirror head itself. Link to comment Share on other sites More sharing options...
Sinbad Posted October 17, 2017 Share Posted October 17, 2017 Hi Stridey,Thanks for the confirmation of the parts required and the additional info and photos.I have a liking for shiny, chrome or polished alloy parts on my seven and have tried the bullet shaped tripod mounted mirrors, but these were fitted with flat glasses and the field of view from them was next to useless.I really like the mirrors you have fitted and am persuaded that they will work well on my seven.Thanks once again for taking the time to post your method of fitting them - appreciated.- Paul Link to comment Share on other sites More sharing options...
Stridey Posted October 17, 2017 Share Posted October 17, 2017 It works both ways Sinbad... you've just confirmed that the bullet shaped ones don't have a great field of view. (I was interested in those for a vintage look at one point)The convex on the Kiwav seems more pronounced at one end of the lens so actually gives a really nice view of the car wing, but also a non distorted view of the rear/outwards away from the car.im particularly happy with the passenger side view, it allows me to see the kerb, but also directly backwards, supplementing the rear view mirror.If you go this route I hope you get the angles working for you too. Link to comment Share on other sites More sharing options...
rockinroyston Posted November 2, 2017 Share Posted November 2, 2017 This worked for me, very happy with the mirrors & I can now see behind me.... https://www.lotus7.club/blogs/spa-mirrors Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now