Jh roadsport Posted October 9, 2017 Share Posted October 9, 2017 hi guys I noticed one of the two engine cover fixings is missing. Anyone know the correct part so I can order one? Thanks Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted October 9, 2017 Member Share Posted October 9, 2017 What's the Ford model number for the engine...then look here.Jonathan Link to comment Share on other sites More sharing options...
Jh roadsport Posted October 9, 2017 Author Share Posted October 9, 2017 Thanks, though I've found it in caterham parts. It's comes under button head screw- csr coil cover m6-16mm which is a pack of 5 even though there's only two to fix the cover. Maybe the spares are for when they do the disappearing act. Link to comment Share on other sites More sharing options...
ScottR400D Posted October 9, 2017 Share Posted October 9, 2017 I wouldn't bother getting an OE fastener. They are a very ordinary posidrive buttonhead. I already had some when mine went awol. There's a reason they aren't anything more than a simple screw. If you over tighten you'll crack the cover. Best to just nip up after applying a dot of threadlocker (Loctite 243 or similar). If you don't lock the thread they'll come undone again. Another thing is that the cam cover is known for cracking so worth checking for oil in there when you have the coil cover off. If (when?) it does crack, it's about £100 for a new one with gasket or you can locate the crack and repair with a bit of epoxy. IME that's a better solution because it seems they crack once then are OK. (So far!)I remove the coil cover every few months to check the cam cover is OK and in between keep an eye out for oil on the back of the engine - that's where it ends up if the cam cover cracks. Again IME. Link to comment Share on other sites More sharing options...
Jh roadsport Posted October 9, 2017 Author Share Posted October 9, 2017 Thanks I had a good look around it the other day as I was doing an oil/ filter change. Nothing untoward though only on 850 miles so early days. Link to comment Share on other sites More sharing options...
Mark w Posted October 9, 2017 Share Posted October 9, 2017 I put a rubber O ring under the head of mine , stops over tightening and helps to stop it un-doing itself . PS pack of 10 bolts on Ebay for £1.13 inc postage ! http://www.ebay.co.uk/itm/BUTTON-HEAD-SCREWS-ALLEN-SOCKET-BOLTS-M3-M4-M5-M6-M8-A2-STAINLESS-STEEL-KAYS-/160792810792?var=&hash=item256fff9528:m:mvvPtoU1x8xS6RTVW6EkBUA Link to comment Share on other sites More sharing options...
Jh roadsport Posted October 9, 2017 Author Share Posted October 9, 2017 Thanks Mark I've ordered a pack of ten. I'll put a dab of loctite on the thread. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now