HendrixsWhiteStratReturns Posted August 24, 2017 Share Posted August 24, 2017 What does everyone use now this has been discontinued...is Millers's any good ? Link to comment Share on other sites More sharing options...
andy couchman Posted August 24, 2017 Share Posted August 24, 2017 Just acquired an old Triumph (Vitesse) an there's a view in that community that on old engines, you don't really need an additive. Years of use mean the valve seats naturaly harden (as I understand it). Another sufggestion was to use Redex.However, I'm not an engineer so please shoot this down in flames those who are!Andy Link to comment Share on other sites More sharing options...
Tony P Posted August 24, 2017 Share Posted August 24, 2017 I hadn't heard that Valvemaster was a thing of the past...When these additives first came into common usage, the general wisdom seemed to be that most of them did a decent job, but as they were all based on slightly different chemistry one should pick one and stick to it.Does anyone know if, for example, Miller's has the same basis as the Castrol?Interesting thoughts, Andy. Link to comment Share on other sites More sharing options...
OliverSedlacek Posted August 24, 2017 Share Posted August 24, 2017 I think the argument that the seats harden is spurious, as the surface hardness gets worn away regardless (otherwise there would never be a problem). On the other hand, valve seat recession just doesn't seem to be so bad on engines that only do a few thousand miles a year that you can probably get away without an additive for quite a few years. Link to comment Share on other sites More sharing options...
Mechanical Moz Posted August 26, 2017 Share Posted August 26, 2017 You could go with the real deal, tetra ethyl lead. http://www.tetraboost.comThe different brands are based on different chemistries. http://www.fbhvc.co.uk/legislation-and-fuels/fuel-information/I've been using Castrol Valvemaster Plus in my classic Mini, it was a toss up between that and Millers VSPE. I liked the bottle on the Castrol with its built in dispenser more though! Am tempted to buy a good few bottles now if I can before it's sold out. Link to comment Share on other sites More sharing options...
HendrixsWhiteStratReturns Posted August 27, 2017 Author Share Posted August 27, 2017 Thanks to all - I was rummaging around in the last few unpacked boxes since my house and found 2 full bottles which is something but I think I'll switch to Millers ( agree about the bottle though !!).Interestingly I emailed the additives guys at Castro asking for more info....they received and read it, but have so far failed to respond - if they do I'll post it. Link to comment Share on other sites More sharing options...
NORTH KENT ARS Posted October 19, 2017 Share Posted October 19, 2017 Two months on from the last post on this subject and most outlets are now showing Castrol Valvemaster as Out of Stock, or alternatively being offered at silly prices (over £40 a bottle on Amazon FFS ).But it is still available for a reasonable price at A-Head 4 Healeys (www.ahead4healeys.co.uk), although i suspect not for long. I've just stocked up at £13 a bottle for the 'Plus' version, which also contains an Octane booster. I should now have enough to last until I fit that unleaded head that's been gathering dust on the shelf for a while now . . . I don't think any of the other products available are phosphorous based or as concentrated as Castrol Valvemaster - one 250ml bottle treats 55 gallons, which is enough for over 1300 miles even in a thirsty crossflow. Some alternative products are not much cheaper and only treat one tank of fuel . And then there's the issue of building up a protective layer of the alternative element all over again, although I'll be the first to admit that I'm no Chemist.If you haven't already stocked up i suggest you do so now.Crudders Link to comment Share on other sites More sharing options...
Ian Macquarie Posted October 19, 2017 Share Posted October 19, 2017 I used Valvemaster plus for every fill since leaded petrol was withdrawn. When I had the X/flow rebuilt last year the amount of valve seat recession was commented on by Steve the engine builder. (All 8 valves now have hardened seats.)Ian Link to comment Share on other sites More sharing options...
HendrixsWhiteStratReturns Posted October 20, 2017 Author Share Posted October 20, 2017 Hi CruddersGood spot - I've just ordered some as well. Zero response from Castrol and tweets/emails/phone calls ignored.......poor really Link to comment Share on other sites More sharing options...
Ed White Posted October 20, 2017 Share Posted October 20, 2017 Ian your comment is a little unclear. Was his comment good or bad? thanks, ed Link to comment Share on other sites More sharing options...
Ian Macquarie Posted October 20, 2017 Share Posted October 20, 2017 Sorry Ed,He thought it was really bad. The exhaust port on the left should really look much more like the inlet port on the right. (ie no vertical step before the angled valve sealing surface.Ian Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now