rgrigsby Posted May 13, 2017 Share Posted May 13, 2017 Small hiccup at Dunsfold when my throttle cable snapped, should be easy to fix but I'm struggling to get the old cable out.The issue is at the TB end, I've removed the cable from the nipple but the cable is routed through a small block at the beginning of the mechanism and I can't figure what is preventing it coming out.It rotates in the block but I can't see what is stopping it coming out, the block in the top right of this picture although this is a different set of TB's.Any suggestions?http://www.sbdev.co.uk/Fuel_Injection_Kits/Fuel%20Injection%20pics/TLK-CLS-2-and-TLK-K3-RH-01-on-TP-VX-2-0-K3.jpg Link to comment Share on other sites More sharing options...
Pendennis Posted May 14, 2017 Share Posted May 14, 2017 You have to rotate the barrel about 90 degrees then it will fall out the side of the holder Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now