Duckpit Posted April 11, 2017 Share Posted April 11, 2017 I had my jaeger rebuilt about a year ago and the rebuild covered the electronic gadgetry that is now in my dizzy to replace points and condenser. After only a little use the needle started bouncing and then it went straight to max on turning the ignition on.I disconnected for a few months and re connected yesterday. Again it was fine for a while but now has reverted to max revs.Any ideas please ? Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted April 11, 2017 Member Share Posted April 11, 2017 I'd check the wiring and connections, and If I couldn't find a problem then discuss it with whoever fixed it last time or John Ostick.Good luckJonathan Link to comment Share on other sites More sharing options...
Budjuggler Posted April 12, 2017 Share Posted April 12, 2017 Jaeger now in administration!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now