David Mirylees Posted April 8, 2017 Share Posted April 8, 2017 Silvertop Ford Zetec 2.0L engine Whiting/Dunnell Twin 45 Webers Twin Throttle Linkage K&N Filters Dunnell Inlet Manifold Dunnell Alloy Sump Dunnell ECU & Software Dunnell Wiring Harness BHP 153 Alternator Engine Complete less clutch, flywheel and exhaust manifold (parts retained for new injected engine) Engine removed to be replaced with a new Omex injected Zetec. Silvertop was performing like a train and now after 2 months of pain and wishing that I had never started the damned swap, I have got the Omex to fit in my 1988 chassis and is at least running. Silvertop has been running in my Seven using the basic ECU setup ie. Coil, TPS, Crank Position. However the harness has all the wiring present for full use of the ECU. Simple 3-wire connection to the Seven (Ignition/Tacho/Earth) I was going to keep the Silvertop as a JIC spare but additional costs incurred with the Omex swap means that it isn't a practical option. So this (almost) complete engine is up for grabs at a no-nonsense £1200 Collection from West Dorset. David Mirylees 01305 266418 dmirylees@gmail.com Link to comment Share on other sites More sharing options...
johnnyseven Posted April 10, 2017 Share Posted April 10, 2017 That's a cheap replacement for a worn out xflow! Link to comment Share on other sites More sharing options...
David Mirylees Posted April 10, 2017 Author Share Posted April 10, 2017 Johnny, I didn't want to mess about so it just helps offset this Omex straight swap !!****$""£4$$4david Link to comment Share on other sites More sharing options...
Ed White Posted April 11, 2017 Share Posted April 11, 2017 What flywheel do you use with this please? Seriously tempting! Link to comment Share on other sites More sharing options...
David Mirylees Posted April 11, 2017 Author Share Posted April 11, 2017 Ed. You could use the standard Zetec one. I had a Dunnell lightened (Zetec) unit which I used on the new motor.Specialists on the Zetecs are Raceline and Dunnell.david Link to comment Share on other sites More sharing options...
Ed White Posted April 11, 2017 Share Posted April 11, 2017 Cheers David. I've a zetec engine already, and have the exhaust manifold. This would save the work. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now