Roadsport06 Posted April 7, 2017 Share Posted April 7, 2017 Afternoon all,I've come to fit my shiny radtec and need some help with its plumbing.I have the tee-piece where one hose goes to the expansion bottle and one to the top of the rad (marked with a yellow line on the photo). In the case of the radtec there isn't a place for this hose. I assume it is just to bleed out air so I can remove the tee piece and this hose is removed.Am I right? or should I be doing something different? Link to comment Share on other sites More sharing options...
SM25T Posted April 7, 2017 Share Posted April 7, 2017 yes. Link to comment Share on other sites More sharing options...
Roadsport06 Posted April 8, 2017 Author Share Posted April 8, 2017 Thank you, much appreciated. I'll order a new piece of hose to replace the piece with the tee in. The tee fitted is a brass one that I brought to replace the plastic one that a few owners have had break. If anyone wants it then I'll be at the chip shop run. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now