F355GTS Posted March 31, 2017 Share Posted March 31, 2017 Does anybody have an old S3 (imperial) Scuttle with wiper holes, any condition as only to be used to trial fitting thanks Link to comment Share on other sites More sharing options...
Tazio Posted March 31, 2017 Share Posted March 31, 2017 There's one on the caterham 7 market place on Facebook for £20 Link to comment Share on other sites More sharing options...
Molecular--Bob Posted March 31, 2017 Share Posted March 31, 2017 hi MarkI have a 1990 spec one that was on mine before my crash. Will need it for another 2 weeks though as i need to transfer the positions of the screen and popper holes onto the new one. It is rough but undamaged. Yours for postage, which might be a bit steep as it will need decent packaging?Bruce mentioned that the earlier cars like mine have closer spacing of the wiper spindles when i was sorting my rebuild with Arch, so not sure mine is what you need. Ian Link to comment Share on other sites More sharing options...
F355GTS Posted March 31, 2017 Author Share Posted March 31, 2017 Thanks Ian, I think my wiper mechanism might have the narrower ones, I'll have a measure Link to comment Share on other sites More sharing options...
F355GTS Posted March 31, 2017 Author Share Posted March 31, 2017 thanks Tazio Link to comment Share on other sites More sharing options...
Molecular--Bob Posted March 31, 2017 Share Posted March 31, 2017 I will be with the car tomorrow so will measure mine as well and we can see how they compare. You could have it sooner if you would be willing to post it back once you have done your trial, my new scuttle is in storage and the owner is away for 2 weeks. So I can't access it to transfer the positions across. Happy for you to have it longer if needed as I have wiring to do for a few weeks yet. Link to comment Share on other sites More sharing options...
F355GTS Posted April 1, 2017 Author Share Posted April 1, 2017 Hi Ianwiper centres are 9"I'll give the timings some thought, I'm in no mad rush though Link to comment Share on other sites More sharing options...
Molecular--Bob Posted April 1, 2017 Share Posted April 1, 2017 hi Markthe scuttle holes on mine are also 9 inch, 4.5 inch either side of the washer outlet. After 2 weeks i will be done with it, so if you can wait that long i'm happy to send it one way. Ian Link to comment Share on other sites More sharing options...
F355GTS Posted April 2, 2017 Author Share Posted April 2, 2017 Thanks Ian, that would be great Link to comment Share on other sites More sharing options...
Molecular--Bob Posted April 2, 2017 Share Posted April 2, 2017 HI MarkFeel free to remind me I need to ship this, I have officially the worst memory in the world so a reminder will not offend. It has no vertical panel, so I will probably bolt it to a piece of scrap ply to keep it in shape on its way to you.Ian Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now